Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Zenith 750 Cruzer, elevator, L angles
June 16 2023
Cut L angles using the new band saw.
Using a wrapping paper to open the elevator skin to get a hand free access to the L angles.
Using a clamp to fix the L angle position.
Using 12 inches drill bit to make the L angle holes.
Comment
-
Comment by Alexander Samoylovich on October 8, 2023 at 4:58pm
-
Hi John.
I have both. My right angle adaptor is rather big.
In some places the angle drill works better. In some places I can only use a long drill.
-
-
Did you consider using an angle drill for this? Would that work? I have an angle drill but not a super long bit.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers