Online Community of Zenith Builders and Flyers
October 26, 2023
The new wider spar root angle does not fit the root top skin. The old one also does not fit.
The top of C75W4-2 Root Rear Rib is not flush with the spar top and with the Spar Root Angle. It corresponds to the drawings. The spar end height is 80mm and the Root Rear Rib front end height is 91mm.
Since the tops are not flush there is a gap between the Wing Root Top Skin and the Spar Root Angle.
The first two pictures show the spar and the Root Rear Rib are not flush.
The third picture shows the gap between the Wing Root Top Skin and the Spar Root Angle.
I asked Zenith what to do. We agreed to make an experiment, bend the angle and see how it works,
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers