Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Zenith 750 Cruzer, Drilled holes in the struts
November 12, 2025
Drilled the holes in the upper part of the struts. Tried to fit the struts. The right wing attachment is too tight to fit by hand. It is too tight even without the strut.
Asked Zenith.
The slot in the part C75W7-4 is too tight. I cannot fit it with hands. I looked at the conference. Some people say to file the male part a bit and polish it. What is the right way to fit?
Zenith answer: polish all surfaces to not to remove too much.
Comment
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers