Clint L Gosch's Comments

Comment Wall (13 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 10:13pm on December 5, 2023, Tony Renshaw said…

Hey Clint, 

Got your reply about landing lights and AeroElectric. Thanks for that. 
can we chat outside of the forum, I’d like to take you up on being a bit of a building mentor, I don’t have anyone around building a Cruzer, I haven’t even seen one yet I am building one. My email is bfreeppg at gee male dot com, I hope you get this, hat the forum filter doesn’t pick up my deliberate mistake. I wonder why they don’t encourage comms outside of the forum, other than Zenith get to profile people and be eaves droppers…..makes me sound like I am paranoid. Anyway, would love to chat via email. 👋

At 9:08pm on February 14, 2023, russ davis said…

Enjoyed your night landings video at KCID.  I just committed to build a 750 Cruzer (Aug delivery).  I fly into CR frequently from my farm strip IA26 to visit my daughter and family. In fact we;re visiting this weekend.  Any chance I could connect with you (if not this weekend perhaps another) to see your plane and listen to the voice of experience.  

Russ Davis

7126601051

At 11:30am on October 15, 2020, Martin Bima said…
That's a KLR ..... I have a KLR.
How many other 701/750 flyers have a KLR?
The KLR is a 701/750 in motorcycle form. Cheap, tough, can do everything, but not great at one thing.
At 7:41pm on November 7, 2018, Brian A Manlove said…

Howdy!!

At 10:48pm on May 4, 2017, ronald zielke said…

Hi Clint  thought I'd drop in and see the progress  as always your work is fantastic.  I'm hoping to move to the airport be fore the end of month

At 11:32am on June 30, 2015, ronald zielke said…

thanks clint  you can't believe how simple it is to just put it together  i have decided to cut the elevator crank off of the torque tube, there was a post on line that someone did that i really liked and am kind of copping it i can't remember his name but will get it and post the credit to him.   having fun see you at mexico in september, my son and i will be going early to attend c.c 34 and finish the build of my corvair motor

At 9:19pm on February 8, 2015, ronald zielke said…

Hi  how did you make the bend for that z bend on the back of slats?  On my break I will have to make the first 90 and then turn the sheet over to make the second bend and that will be against the first bend ,    not good

At 3:05pm on July 16, 2014, ronald zielke said…

hi clint  what wire did you use for your position lights?  I think I'm going to use aveo  powerburst, from a/s.  I'm still not sure if it has to be used with shielded or regular. in there info sheet they suggest 20 ga but do not say shielded ?????   What lights did you use  thanks Ron

At 8:58pm on February 11, 2014, ronald zielke said…

hi clint;  ron zielke here. could you please sent me your home or cell to my personal email zman@scrtc.com would like to ask some questions but not on this form.  And a good time to call.        Thanks for your help.

At 9:51pm on October 1, 2013, ronald zielke said…

thanks my friend this has been very helpful, I hope mine turns out as good as yours

At 6:00pm on September 30, 2013, ronald zielke said…

Clint it looks like you got the riser table from Cleveland tool, did you mount the "c" frame to it  and slide the hole assembly along your table to rivet the spars?  on Your fuel tanks, did you have a drawing for them or just design them yourself?  One last question did you  drill both spar and cap together, and did you  drill by hand or drill press.  Your workmanship is really great. thanks     Ron

At 11:15pm on April 22, 2013, ronald zielke said…

clint thanks for your comments on the rudder I have been watching your site too and wish i were as far along as you. Your pics are realy great.  When i need help, your one place i always ck

At 8:34am on January 5, 2013, Pat Kelly said…

Thanks for all the great pictures Clint. It's a huge help. Keep them coming. Your craftsmanship is outstanding.

Pat

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service