Lowrance Airmap 2000C connect to Dynon

I have been to the Dynon forum site for connection info of the 2000C to the D100 and it says "Hook the TX line from the data cable to pin 22 on the EFIS or pin 3 on the serial update port.  Connect the ground of the data cable to aircraft ground, or any ground on the EFIS." 

 

This assumes you have NMEA/DGPS Adapter Cable (NDC-2) from the 2000C.  That cable has 4 wires out 1. White (transmit) to EFIS (yellow/green), 2. Red (power), 3. Black (Ground), and finally

4. Green (receive)   ??????  Green to what on EFIS?  Receive what?

 

Anybody know?

 

Thanks,

Mike

Views: 651

▶ Reply to This

Replies to This Discussion

Permalink Reply by Geoff Klestadt on May 26, 2011 at 2:33pm
This is a guess, but I would imagine that the "receive" wire is unconnected. It sounds to me like the Lowrance can accept DGPS signals from a DGPS beacon through that line, thats what my old Garmin does. I can't find much about Lowrances implementation of NMEA protocols in its manual. Good luck.
Permalink Reply by Mike Miller on May 26, 2011 at 2:35pm

Thanks for the reply...

Mike

Permalink Reply by Ken Pavlou on May 27, 2011 at 9:25pm
The dynon only needs the transmit line from your GPS.  The dynon doesn't send any information to your GPS so the receive wire on your GPS can remain unconnected.
Permalink Reply by Mike Miller on May 27, 2011 at 11:17pm

Thanks Ken...about what I thought...

Mike

Permalink Reply by Dr. Edward M. Moody II on May 28, 2011 at 1:23pm
Have you found a source for the airmap database updates? Last I heard, LEI was no longer getting or offering the Jeppeson database.
Permalink Reply by Mike Miller on June 9, 2011 at 8:07am

LEI suggested I go to Jeppeson.  Will do that next, haven't had time right now...wiring the panel.

 

 

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service