Zenith custom Rivet gun tips need info!!

HI all,

i have some really good rivet pulling tools, manual and air, but just need the modified tips for them to pull the AVEX rivets the way Zenith wants them..  does anyone know a place to get the tips already modified or the specs  and instructions on how to modify them myself??   thanks

 

Views: 1367

▶ Reply to This

Replies to This Discussion

Permalink Reply by Geoffrey Alexander on August 17, 2011 at 7:41am
Call Zenith. That's where I got mine.
Permalink Reply by Fred Stratman on August 17, 2011 at 9:13am

See page 9 of this document:

http://www.zenithair.com/stolch701/data/701-construction-manual-int...

I do mine with the oval burr.  It works great.

Permalink Reply by joshua knowles on August 17, 2011 at 9:48am

Hi All,

 

thanks for the info.. i called Zenith and they just tried to sell me the whole kit.. thanks for that.  josh

 

Permalink Reply by Jerry Latimer on August 17, 2011 at 10:14am

Here is a link to a youtube video on how Zenith modifies theirs.

http://www.youtube.com/watch?v=-FfdJPOM51A

Some folks have used drill presses in place of lathes to do the mod.  This video shows a drill bit being used, but some folks use a round grinding stone from a dremel tool to make the recess.

Zenith used to charge $8 a tip to modify them?

Jerry

Permalink Reply by joshua knowles on August 18, 2011 at 2:56am

 

thanks Jerry!  i think i will do the mod i have a drill press i think i can use.

 

thanks  josh

 

Permalink Reply by jim on August 18, 2011 at 5:23am

Hi, I resharpened a normal steel drill to have a round cutting edge, and drilled the riveter head...

worked fine...

Permalink Reply by joshua knowles on August 20, 2011 at 7:54am
thanks jim, that is what i will do.
Permalink Reply by Robert Crawford on August 21, 2011 at 9:45pm

I used a Butane torch to heat my rivet nose pieces until they were cherry red. After letting them cool I put them in my drill press vise and used a 3/8 " bit to drill it out. Make sure it's pretty well level and squared up in the vise. After several tries I got it to deep and had to file some off the tip so it wouldn't leave a mark on the skin. I polished the inside using a wooden dowel and some Scotch Bright in my hand drill. Works very good. I made a video but haven't posted it anywhere.

Bob

Permalink Reply by joshua knowles on August 21, 2011 at 11:11pm

Hey Bob,

 

  excellent.. that is what i am going to do.!!  cheers!  josh

 

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service