Online Community of Zenith Builders and Flyers
Hello,
I would like to know if anyone has the Viking engine installed and if you have any weights and performance numbers?
Thank you,
Mike Ice
Anchorage, Alaska
Tags:
Living where you do....proven reliability in a real world flying enviroment is priceless. Buy a Rotax 912S. Don't be the test pilot doing R&D for yet another auto conversion. All the aircraft videos on floats, skis, off strip bush landing feature a Rotax 912 series engine on the aircraft. Barnstormers is full of aircraft owners selling their project...."low time, but flies great??" with an auto conversion. Remember Honda Cam 100, Subaru Stratus... where are they now? If you want a Honda Cam 100 with 15 minutes on it there is one for sale In Carp, Ontario off a Sonex...only 15 minutes flight time...flies great.... real cheap price. The Sonex is scrap...beer cans only. Beware of the log book pencil scam where the times are inflated, and test periods flown off with a pencil on the ground.
Hi Mike
My name is Ron Waechter and I own the 701 which Jan took to OSH last summer. I did not build the plane , Jan installed the Viking engine with a rather temporary cowling installation. I have about 30 hours on it since picking it up in Fl. It would have more but I have been distracted by my hangar and runway projects this fall in Indiana. The engine runs fine with great temps,Jan has upgraded the ECUs to help with fuel mixture adjustments. My new empty weight with the HF110 is 646lbs. TO performance is much improved but cruise only improved between 5 to 10 mph.( working on installing strut fairings) I feel very comfortable behind this engine and my building partner and I have ordered a second Viking for our current 701 project.
In all fairness I will admit that Indiana is a rather flat state and with the 701s landing qualities I am in a better place for dealing with a forced landing than some of the terrain I flew over bringing it home from Fl.
Once I get flying again I will try to post more .
Ron
Hi Ron,
Do you have the VG's on the wing? And /or stab.
Dan Stanton
Hi Ron,
If I read the info on your plane that Jan posted, the empty weight with about 5 gallons of fuel and the 2200 was 630 is this correct? That would make about 600 bone dry?
Ron
It's nice to hear from someone flying a Viking. It doesn't matter which aircraft website you check on it seems that none of the people flying a Viking is talking, not even on the Viking site. I don't visit the RV site perhaps that pilot is posting on the RV site. I know for a fact that there has been no communication on the Just Aircraft site from an Viking owner and really there have only been rumors on the Zenith site. I have been following the Viking since it was introduced and I believe it is a very promissing engine. I just don't understand why it has been so quiet out there. There are a lot of people waiting to hear from the Vikings that are up and flying.
I hope that everything goes well for you. Take care and enjoy.
Joe B
I'm looking forward to this as well. I know that Jan is selling his 601? demonstrator with the viking, something I don't understand. I think he has about 600 hours on it.
Personally I'd keep flying this version as long as I could just to up the confidence level. The engine does not worry me, it's designed to run at high RPM and Honda makes some, if not THE best engines out there! What makes me nervous is the PSRU. Jan has a video of him changing the oil after several hundred hours looking nice and clean but that's hardly scientific. It does look like a very simple system though and well thought out.
I'd like it see hit 1200 hrs minimum then take the PSRU apart and checked for tolerances and have the oil sent off for analysis! Then keep it going to the "reported" 2k TBO!
I do agree it's a very promising engine, hopefully by the time I'm ready to insal one, more owners of them will put out some numbers. That should be soon, apparently Viking is selling them as fast as they can make them!
OK Guys, I have only 15 hrs. on my 701/Viking engine so far.
Yes, there have been some teething pains in getting everything installed and working.
I have a mix of the Viking wireing and an Aeroelectric plan. It took some doing to get everything working togeather so that I'm comfterble with it. Now that I hve it thru my thick head just how evrything works, I'm happy.
The take off is shorter than with the VW, but I would hope so. Top end is about 6 to 8 mph. faster, but you can't race a turtel. Putting strut fairings on this winter.
I do have some issues with the timing on the engine on cold starts. Jan is changing them as soon as he gets back from Sebring. I didn't get it in the mail fast enough. I will let you know how that works out.
You can't post ANYTHING negative on the Viking web site, it won't go thru. I have tried in the nicest way I could to reply to questions there, but no soap.
If you want a turnkey setup, you might wait a year or so to buy. If you like to play around with this kind of stuff, than go for it. I think that when the dust clkears, it will be a good engine.
I did post some weights on the viking site, but I don't remember what they were. Look them up.
I will let you know more after I get back in the air.
Dan Stanton
All I can say is Wow!!!
"I will never understand the self destructive nature of some involved with aviation, only to protect an inflated ego"
look into a mirror for the answer to that statement
Wellllll I can kinda see Jan's point...there is always two sides to every story! If you make design changes and something gets fried..I don't think that is the manufacturers fault. And Jan is right that we do need new blood in the sport aviation business...the more the merrier...there shouldn't be room for only 30k FWF packages, you can buy a good used entire small plane for that price and if no alternatives come about, that WILL lead to a slow death...
Thank you. We need to work together on this.
Jan
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).