I'm hung up on installing 3/8" 5052-0 aluminum fuel line in my right wing. This is stopping my progression to closing the right wing. What fitting do I need to pass through the rear spar?

Thanks in advance

David

Views: 481

Reply to This

Replies to This Discussion

AN833

I used these. You'll have to order the nut as well.  I used solid aluminum line in the fuselage to the front seat bulkhead then braided stainless steel lines in the cockpit and in the wings.  Make sure you use an aircraft flair tool to get the right angles on the flair!

https://www.aircraftspruce.ca/catalog/hapages/an833.php?clickkey=15591

Thanks for your help.

The fittings that pass through are normally called bulkhead fittings.

Thanks for your help.

You might consider posting the model aircraft you are building. Otherwise it is difficult to give you helpful advice.

Tim

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service