Online Community of Zenith Builders and Flyers
To those of you already flying, I have a question,
I realize that we are required to show compliance with FAR 91.319 during our Phase One period, Hence the development of our own unique "Flight Test Plan"
How exactly are you documenting this compliance? are you documenting the findings on the flight test plan itself and just the hours in your pilot logbook? or are you specifying each maneuver?
What about the airframe log? maybe this is where it is best to document compliance?
My presumption is that as long as I reference the flight test program in my pilot logbook, that should be enough of a paper trail for the feds.
(IE: Pilot logbook entry; "Phase one test flight #_________, refer to Flight Test Plan for specific maneuvers executed")
Your Thoughts?
Brad Cohen
N969BC
Phase One
Tags:
When you obtain your Airworthiness Certificate, the FAA or the DAR will issue you a set of Operating Limitations. Follow them to the letter - yours could slightly vary from someone else's! However, the Operating Limitations will usually prescribe the minimum number of flight test hours and give you the exact wording which goes in the aircraft (not the pilot's!) logbook and will call out specifically what test data is to be logged in that wording. Usually the last sentence says the aircraft is now in Phase II operation.
My OL called for this entry:
I certify that the prescribed flight test hours have been completed and the aircraft is controllable throughout its normal range of speeds and throughout all maneuvers to be executed, has no hazardous operating characteristics or design features, and is safe for operation. The following aircraft operating data has been demonstrated during flight testing: Speeds Vso, Vx,Vy, and the weight and CG location at which they were obtained. Aircraft in Phase II operation. (signed)
(The OL called for the actual speeds, CG, and weight to be inserted in the statement.)
So, basically you're going to have to insert the speeds, CG, and weight called for in your particular Operating Limitations and record this in the aircraft logbook before beginning Phase II operations and carrying passengers.
Hope this helps,
John
N750A
You can log any and every flight you want in your pilot's logbook and word it any way you want.
For redundancy, I also keep a flight log in the aircraft to record each flight, make notes, etc., but AFAIK there is no requirement to do so. Just figure if my pilot's logbook (at home) was every lost or destroyed, I could re-construct my log book from the unofficial flight log.
Unless (and unlikely) your Operating Limitations call for it, I'd just log any maintenance, modifications, and inspections in the aircraft log book just like you'd normally do outside of Phase 1 - with the exception of the required entry as we discussed before.
My disclaimer is that this is just my experience and have no special knowledge! However, also in my experience, you can ask the FAA and usually you get a different answer from each bureaucrat you ask! :>)
John
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).