Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
750 ht fairings, ballast,toolbox
I started out trying to figure how to add a little weight to the tail. Wound up putting a toolbox under the ht. That design lead me to fair in the front corners of the ht mounts as well.
Was a days work or so , but fiberglass would have taken a while too and now i have a hidden toolbox. It all removes easilu with a few screws for inspections.
- Attachments:
-
-
20191011_191015.jpg, 3.7 MB -
20191011_193224.jpg, 2.2 MB
-
20191011_190736.jpg, 2.2 MB
-
Replies to This Discussion
-
Permalink Reply by Norm Neuls on
-
I cleaned up the HT/Fuselage area in a similar fashion on my 750 three years ago. Made the fairings out of .020.
-
-
Looks like the photos didn't go thru - I'll try again
-
Permalink Reply by Steven Ward on
-
That's very nice, thank you for sharing! I am going to do the same thing.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
