I am getting ready update my front landing gear to the bushing system and want to remove my O-235 while I do this work. The plane is in the build stage and there is no prop, cowling or accessories to deal with. I have been researching engine stands and only find the overhaul stand or adapting an automotive stand (which seems a bit dicey). My thought is to make a stand which supports the rear via the engine mounts and then have a vertical support which would attach at the propeller plate. Are there any concerns about supporting the weight at the propeller plate? Any suggestions on a stand design?
Tags:
Replies are closed for this discussion.
Installed with engine on. Not a problem. Automotive stand will work just fine.
I use a Harbor Freight chain hoist mounted to a rafter above for all engine handling. Thought I did install the puck system without having to remove the engine, but it would be easier without it in the way.
Zenith Planes & Parts For Sale
Classified listings for buying or selling Zenith builds and parts...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).