Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Open Discussion Forums (non model specific) (2,836)
| Discussions | Replies | Latest Activity |
|---|---|---|
Vista-Vent Installation in Bubble DoorMy STOL 750's Snap-Vent always fit rather loosely in the passenger's bubble door. I tried another Snap-Vent that had a spring to increase… Started by John Austin |
9 |
Nov 23, 2018 Reply by John A. Minatelli |
Did you powder coat *all* steel parts?Hi, All; I'm at that point (aft fuselage) where I'm going to start installing some of the steel weldments like the flaperon control tube,… Started by Carl Orton |
8 |
Nov 19, 2018 Reply by Ken Ryan |
Any Canadian buildersIf you get any Canadians at your Rudder workshop, you would be doing them justice by telling them to leave one side not-riveted just cleco… Started by Kerry Mykituk |
0 | Nov 16, 2018 |
Cruzer wing kit questionThe 3-part Zenith YouTube video "Building a Cruzer " shows that the front and rear wing ribs come pre-drilled to final hole size (where th… Started by Daryl Dierwechter |
3 |
Nov 15, 2018 Reply by Daryl Dierwechter |
Airworthiness Certificate: Zenith CH 750 CruzerI received my airworthiness ticket today from DAR Steve Walton at KRYY McCollum field Kennesaw GA. I'm the one in the red plaid shirt. Started by William McClain |
18 |
Nov 14, 2018 Reply by William McClain |
Mode C transponder question for 2020 FAA mandateI have scoured this and other forums looking for information about the usefulness of mode C transponders after the FAA's 2020 mandate to co… Started by Mike Holder |
10 |
Nov 10, 2018 Reply by Gary Welch |
Composite Design Power Panel Model # ZLSP01I didn't make it easy to access my wiring behind my instruments, and a couple times when making minor changes, it took several hours when… Started by James R Depfer Sr. |
9 |
Nov 9, 2018 Reply by James R Depfer Sr. |
How long did you have to wait for registration?I send it my registration forms with the notarized ownership, bill of sale from Zenith, etc. for registering my 750 Cruzer with a previousl… Started by Jonathan Fay |
9 |
Nov 7, 2018 Reply by Jonathan Fay |
Help ID unidentified partHi, All; I'm working on the aft fuselage sides, and I've been skipping forward in the plans just to see if there's anything I can rivet in… Started by Carl Orton |
4 |
Nov 1, 2018 Reply by Carl Orton |
Engines ???????I'm wondering what is the best engines everyone is installing or running? Also the pros and cons? I am building the Zenith CH 650 and have… Started by Jeremy w malecki |
125 |
Nov 1, 2018 Reply by Tim Croy |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
