Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Open Discussion Forums (non model specific) (2,845)
| Discussions | Replies | Latest Activity |
|---|---|---|
Canopy Latch FailureCheck out my web site. I had a canopy latch fail. See how I fixed it. Glad I put those holes in the rail to release it. www.zodiacxl.com… Started by Matt Archer |
6 |
Apr 28, 2009 Reply by Juan Vega |
ALODINE?I was reading in a fairly recent issue of "Sport Aviation" magazine ( I think) and read an article about a kit helicopter that had an in fl… Started by Jeff Bingham |
3 |
Apr 22, 2009 Reply by Jim LoBue |
Laying out lines for forming blocksI was looking through my plans and noticed all lines seem to be measured to the tenth of a millimeter. I am guessing no one has a pencil or… Started by Grant Arthur |
4 |
Apr 22, 2009 Reply by Grant Arthur |
Clean, wax, protect the aircraftI'm searching the best soap and the best wax (or both in the same bottle ?) to clean and restore the paint on my CH-701; I looked in the ca… Started by Carl Tremblay |
2 |
Apr 21, 2009 Reply by Carl Tremblay |
ATD 5830 rivet gun problemMy rivet gun began spewing air out of the hole underneath the trigger? The instructions for dismantling it are pretty bad! Any ideas? Pictu… Started by Dr. Edward L. Olds III |
2 |
Apr 21, 2009 Reply by Dr. Edward L. Olds III |
Flutter/hingesHas anyone found out if the aircraft in question had regular hinges, or the sheet metal hinges? Started by William Campbell |
2 | Apr 20, 2009 |
Phone numbers and e-mailsIs there a place on this site where a person can find the phone numbers and e-mails of builders to use in making contacts? If there is, I h… Started by Dr. Edward L. Olds III |
2 |
Apr 8, 2009 Reply by Dr. Edward L. Olds III |
New Zenith ProductPretty funny... has Chris no shame at all? ;) http://www.zenithair.com/4-1-zenith-flyer.html Started by George Harris |
1 |
Apr 2, 2009 Reply by Taylor Ogden |
Olfa Knife - SEM pictures for the curious builderThought I would share some pictures I took of what an Olfa knife does to a sheet of aluminum. Enjoy! Ben Church CH801 Racine, Wisc. Started by Ben Church |
5 |
Apr 2, 2009 Reply by Taylor Ogden |
Creases in the aluminum, on the top surface of the wingsIs it my imagination, or do I detect some creases on the top surface of both wings in the latest 750 factory video. Look to the left side o… Started by Robert Pelland |
2 |
Mar 29, 2009 Reply by Burke Johnson |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
