Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,813)
| Discussions | Replies | Latest Activity |
|---|---|---|
CHT and EGT high tempsHello. I have a 3300 in a 701, I am experiencing CHT up to 360*F in climb with two people and full 20 gal of fuel. The EGT’s are going abo… Started by RandyC in Open Discussion Forums (non model specific) |
4 |
Feb 11, 2022 Reply by RandyC |
Sun 'n Fun CampingI've flown my STOL 750 to Sun 'n Fun several times and camped in Homebuilt Camping - which I highly recommend! However, this year a good f… Started by John Austin in Open Discussion Forums (non model specific) |
2 |
Feb 11, 2022 Reply by John Austin |
Engine Mount - Yamaha ApexStarted by James Neirinck in Yamaha Engines |
0 | Feb 10, 2022 |
Rudder peddles too short?The standard 701 rudder peddles are difficult to use without depressing the brakes as well. For me, I need to angle my feet so just my toes… Started by Dennis Mitchell in Open Discussion Forums (non model specific) |
6 |
Feb 10, 2022 Reply by Arnie Minear |
Propeller Balance Sensor on UL350I am looking for recommendations on where to place the Prop balance sensor on my 350? Started by Scott Miller in UL Power Forum |
4 |
Feb 10, 2022 Reply by Scott Miller |
Hard startingHey guys, First I’d like to say thank you for the time and Information I have gotten for you so far. I have a Jabiru 3300 and when it’s 40… Started by RandyC in Open Discussion Forums (non model specific) |
10 |
Feb 8, 2022 Reply by Eric Inkenbrandt |
Are A-6 rivets domed like the A-4 and A-5?Working on my 750 STOL wings and it’s the first piece with a few A-6 rivets. I bought my pneumatic and hand rivet pullers from Zenith and t… Started by Keith Gempler in Open Discussion Forums (non model specific) |
2 |
Feb 7, 2022 Reply by Perry Delano |
CH750 Transition TrainingLooking for someone in the Winnipeg MB Canada area to do a few hours of CH750 Cruzer (or STOL) transition training with. I'm building a Cru… Started by James Neirinck in Open Discussion Forums (non model specific) |
2 |
Feb 7, 2022 Reply by James Neirinck |
Battery tender portHello Zenith folks, Has anyone installed an external battery tender port? If so, which did you use? I want to install one on my 701 in t… Started by Henry morgan in Open Discussion Forums (non model specific) |
3 |
Feb 5, 2022 Reply by Bob Pustell |
FS: Ray Allen RP3 Position IndicatorNew never installed. Going to use the Dynon Skyview for position indication so this is available. $100 shipped. Offers considered. Started by Greg Kelley in Classified / For Sale Postings |
1 |
Feb 4, 2022 Reply by Greg Kelley |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
