Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,813)
| Discussions | Replies | Latest Activity |
|---|---|---|
Greetings from the Zenith.aero Forum Moderator!As an active forum participant, Sebastien has asked me to serve as a volunteer forum moderator. I have found Zenith builders to be a positi… Started by John Austin in Open Discussion Forums (non model specific) |
9 |
Sep 9, 2013 Reply by Kevin McCune |
Jabiru SD 031-2fellow Jabiruers, please share comments on this mandatory "Bulk strip" calling to replace through bolts and studs. Down here in Colombia… Started by Felipe Uribe Posada in Open Discussion Forums (non model specific) |
2 |
Sep 8, 2013 Reply by adrian dines |
Facet Fuel PumpsI'm having a problem with fuel delivery. My system should use the mechanical pump on my Corvair engine and an electrical "Facet" pump avai… Started by Dan Dempsey in Open Discussion Forums (non model specific) |
21 |
Sep 7, 2013 Reply by Dan Dempsey |
opps on the slatI was trying to make the outboard pilot side slat and made the outboard copilot one. I didn't cut bracket slots yet or rivet it so I should… Started by Jesse Hartman in Open Discussion Forums (non model specific) |
1 |
Sep 6, 2013 Reply by Tim Smart |
750 Cabin Frame/Windshield for salei have a Edition 2 cabin frame and windshield for sale. The cabin frame has been sand blasted and painted with Imron 2 part primer. This c… Started by Manuel A. Yarberry in Classified / For Sale Postings |
2 |
Sep 6, 2013 Reply by Larry H. Dodge |
Gap between canopy and sheet metal;" To gap or not to gap!" - 601XLBOk. I fit the canopy with out the seal.There're a few small gaps between the canopy and sheet metal.Once I place the seal on the glass, the… Started by Richard Simmons in Open Discussion Forums (non model specific) |
2 |
Sep 6, 2013 Reply by Richard Simmons |
Fuel Venting ProblemI am working hard to get the plane in shape to attend the Open Hangar Day at Zenith on the 21st, but am having a problem venting the fuel t… Started by Dr. Edward L. Olds III in Open Discussion Forums (non model specific) |
14 |
Sep 6, 2013 Reply by Doug MacDonald |
SKISIt was 98 degrees here in Wisconsin yesterday - a little tough to go out in the hanger and work on snow skis.....I'm building skis for the… Started by Rick George in Open Discussion Forums (non model specific) |
3 |
Sep 2, 2013 Reply by Rick George |
bend radius question when using Dave's sheet metal brakeHi guys I have a question and was wondering if you can help me out. I'm finishing up my sheet metal brake to build the CH 701. I was readi… Started by Mike Johnson in Open Discussion Forums (non model specific) |
5 |
Sep 2, 2013 Reply by Malcolm Hunt |
Zenith CH 701 for sale - SOLDch 701 Rotax 912 My situation has changed so I need to Sell the airplane. Flies great. No bad habits. Asking $23000 OBO. Plane is in U… Started by Tharon Judd in Classified / For Sale Postings |
2 |
Sep 2, 2013 Reply by Scott Hunter |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
