Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,810)
| Discussions | Replies | Latest Activity |
|---|---|---|
SOLD - 2007 Zenith 701 for sale2007 Zenith 701 for sale $27,000 331 hours on Airframe and engine 2009 Viking HF-110 engine Warp Drive ground adjustable prop Flight line F… Started by John Schaper in Open Discussion Forums (non model specific) |
4 |
Apr 13 Reply by John Schaper |
Problem solvedJust an update on my leaky gas cap issue. As I was researching possible cures I ran across an old discussion in this group covering th… Started by Steve Sickle in Open Discussion Forums (non model specific) |
4 |
Apr 12 Reply by Steve Sickle |
701/750Hello all. New member here from Omaha, Nebraska. I'm looking for a 701 or 750 STOL (and would also entertain other models), if anyone is in… Started by Isaac W in Classified / For Sale Postings |
7 |
Apr 11 Reply by Isaac W |
Getting Rotax 912ULS Up To TemperatureHi all, I am wondering if there is a simple tried and true method of getting a 912 up to operating temp or close to it during warm up peri… Started by Perry Delano in Rotax Engine Forum |
8 |
Apr 10 Reply by Karl Kiltz |
AN525-416R12 ScrewsMy 5th Gen Cruzer uses 8 of these inside the gear channel (2 forward and 2 aft on each side) to hold the Gear Strut Fittings to the front a… Started by William Carter in Open Discussion Forums (non model specific) |
7 |
Apr 10 Reply by Harry Manvel |
Zenith Air 650B Airframe Kit for SaleTail Feathers, Flaps and one Aileron completed. Other Aileron needs about 2 hours of work to finish. Includes Aero Flash Strobes, Wing Lock… Started by Gene Kujawa in Classified / For Sale Postings |
4 |
Apr 9 Reply by Gene Kujawa |
Moving EGT probe, and plugging hole in exhaustHi there - looking for ideas. The original builder put the EGT probes for the two front cylinders sticking straight out to the side. Now… Started by Greg Kulosa in UL Power Forum |
5 |
Apr 8 Reply by Greg Kulosa |
Ray Allen Trim connection for Dynon HDX DisplayQuestion for the masses, I have the Ray Allen Trim Servo and Rocker Switch as supplied in the Zenith 650 kit. For Avionics, I went with the… Started by Benjamin Wiford in Open Discussion Forums (non model specific) |
4 |
Apr 8 Reply by Benjamin Wiford |
Miscellaneous Zenith items - Part 3This is the 3rd and final list of items that I have for sale .. Senders & interfaces 15. GRT VDO pressure sender 0-150 psi. $ 45 USD… Started by Ramesh Nori in Classified / For Sale Postings |
0 | Apr 7 |
Miscellaneous Zenith items - Part 2This is part 2 of the items list that I have available for sale Electrical 10. Starter solenoid from Aircraft spruce $40 USD Avionics &… Started by Ramesh Nori in Classified / For Sale Postings |
0 | Apr 7 |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
