Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,810)
| Discussions | Replies | Latest Activity |
|---|---|---|
BUILDERS/FLYERS IN NORTH CAROLINAJust a note to ask if there are any builders or flyers in NC, VA or SC. I could use some time in type before my first takeoff. Thanks, Vann Started by Vann Covington in Open Discussion Forums (non model specific) |
4 |
May 15, 2009 Reply by Vann Covington |
Angle drills and torque wrenchesI'm looking for a good source of a "reasonable" angle drill and a torque wrench that works in inch-pounds. Has anyone used the 90 or 45 deg… Started by Dr. Edward L. Olds III in Open Discussion Forums (non model specific) |
6 |
May 13, 2009 Reply by Dr. Edward L. Olds III |
Canopy Latch FailureCheck out my web site. I had a canopy latch fail. See how I fixed it. Glad I put those holes in the rail to release it. www.zodiacxl.com… Started by Matt Archer in Open Discussion Forums (non model specific) |
6 |
Apr 28, 2009 Reply by Juan Vega |
Wanted: CH701 100hp and Straight FloatsFinally retiring and ready to fly again! Let me know if you have a 100hp 701 and/or straight floats and skis. Please email David at: hotp… Started by david miller in Classified / For Sale Postings |
0 | Apr 28, 2009 |
ALODINE?I was reading in a fairly recent issue of "Sport Aviation" magazine ( I think) and read an article about a kit helicopter that had an in fl… Started by Jeff Bingham in Open Discussion Forums (non model specific) |
3 |
Apr 22, 2009 Reply by Jim LoBue |
Laying out lines for forming blocksI was looking through my plans and noticed all lines seem to be measured to the tenth of a millimeter. I am guessing no one has a pencil or… Started by Grant Arthur in Open Discussion Forums (non model specific) |
4 |
Apr 22, 2009 Reply by Grant Arthur |
Clean, wax, protect the aircraftI'm searching the best soap and the best wax (or both in the same bottle ?) to clean and restore the paint on my CH-701; I looked in the ca… Started by Carl Tremblay in Open Discussion Forums (non model specific) |
2 |
Apr 21, 2009 Reply by Carl Tremblay |
ATD 5830 rivet gun problemMy rivet gun began spewing air out of the hole underneath the trigger? The instructions for dismantling it are pretty bad! Any ideas? Pictu… Started by Dr. Edward L. Olds III in Open Discussion Forums (non model specific) |
2 |
Apr 21, 2009 Reply by Dr. Edward L. Olds III |
Flutter/hingesHas anyone found out if the aircraft in question had regular hinges, or the sheet metal hinges? Started by William Campbell in Open Discussion Forums (non model specific) |
2 | Apr 20, 2009 |
Phone numbers and e-mailsIs there a place on this site where a person can find the phone numbers and e-mails of builders to use in making contacts? If there is, I h… Started by Dr. Edward L. Olds III in Open Discussion Forums (non model specific) |
2 |
Apr 8, 2009 Reply by Dr. Edward L. Olds III |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
