Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Richard Simmons's Discussions (284)
| Discussions Started (27) | Replies | Latest Activity |
|---|---|---|
Cleaning your wood propHey guys, So I have been running my engine on the ground. I was noting a lot of bugs etc... Stuck on the leading edge and the back side.… Started by Richard Simmons in Open Discussion Forums (non model specific) |
5 |
Mar 21, 2016 Reply by Peter Skedsvold |
Video EditorFor those of you with video cameras, what software do you use to edit with. I see the garmin virb comes with its own editor so that is a p… Started by Richard Simmons in Open Discussion Forums (non model specific) |
5 |
Aug 9, 2015 Reply by Mark Maltais |
ELT bone head mistakeSo, I was preparing to install the ELT, Ameriking Corp AK-450. I broke the arming swith! ¥€%#!! I called and they said repeating would be… Started by Richard Simmons in Open Discussion Forums (non model specific) |
6 |
Jun 15, 2015 Reply by Gary Welch |
Flap torque tibes again!!!I re-drilled my Flap torque tubes today. I opened the AN3 hole up to an AN4. They are closing now with a small amoutn of adjustment left. H… Started by Richard Simmons in Open Discussion Forums (non model specific) |
5 |
Apr 2, 2015 Reply by Tim Juhl |
Re drilling flap torque tubes.Group I drilled my torque tubes for my flaps this weekend and I missed the flaps closing to a propper gap by about 8mm. I know what I did… Started by Richard Simmons in Open Discussion Forums (non model specific) |
3 |
Mar 17, 2015 Reply by Richard Simmons |
Wing rear Chanel secure pointSo, to secure the rear Chanel to the extruded bracket, a hole has to be cut in the lower skin. I have seen notches from the inner trim edg… Started by Richard Simmons in Open Discussion Forums (non model specific) |
1 |
Mar 10, 2015 Reply by Chumphol Sirinavin |
Elevator deflection angleQuestion folks! While setting and adjusting the elevator cables, the best I could get is around 26 degrees of downward deflection Spec is… Started by Richard Simmons in Open Discussion Forums (non model specific) |
3 |
Jan 26, 2015 Reply by Dan Stanton |
Dzus Fastners for the Wing LockersAttached is a photo showing t trial pieces for the Dzus fastners. I was calculating the hole spacing and sizes and then doing a small trial… Started by Richard Simmons in Open Discussion Forums (non model specific) |
8 |
Mar 23 Reply by Harley Myler |
Registration / TaxesList, I am going to start the registration process for my project in the near future. It was suggested for me to think about how I package… Started by Richard Simmons in Open Discussion Forums (non model specific) |
3 |
Dec 5, 2014 Reply by Richard Simmons |
Make shift paint boothI am nearing the point of painting my 601. I have read in several places about male shift paint booths but can't seem to find them. Can so… Started by Richard Simmons in Open Discussion Forums (non model specific) |
4 |
Sep 26, 2014 Reply by Brad Rawls |
- ‹ Previous
- 1
- 2
- 3
- Next ›
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2025 Created by Zenith.Aero.
Powered by
