I recently received a photo of a friend’s aircraft autopilot system and saw large penny washers over the face of the rod ends. As we know Zenith don’t agree that the rod ends can separate from the entrapped ball and bolt to the adjacent structure, but I am at the point where I could install them if I choose. The waters get muddied when EAA encourage their use, as detailed in attached photo. I have a couple of questions for the group:

1) I can only imagine that at some point in the past there has been a failure, but if there had been I would expect it is an industry standard to use a retaining washer, so does anyone know of such a failure?

2) Can someone explain how an entrapped ball can separate from the circular collar cage, and how did they make those suckers in the first place?

The standard AN970 washers are 1”, but you actually need the 3/4” ones in my view. Like everything Zenith if you decide to go down this path you often have to change the AN? bolt length to accommodate the extra length, and my local supplier has minimum quantity orders, generally 20, so I frequently have 16-18 spare. 

3) Has anyone else gone down this path and would be happy to discuss either on or off list? 

Thanks. 

Views: 201

Attachments:

Reply to This

Replies to This Discussion

Although Zenith doesn't specify in their plans the use of large washers on Heim joints (at least not on my plans from years ago), I'm not aware of any objection by Zenith to this.  I've never heard of one of these joints separating, but I recall reading "somewhere" on the internet that it has indeed happened at least once?  Seems to me the joint would have to be extremely contaminated with grit to wear that badly and should be caught on an annual inspection long before it gets that loose!

About the only downside I can think of is to be sure that if the control rod is slightly off-axis and not perpendicular to the shaft or bolt, the joint might require a spacer between the ball and the washer to ensure full freedom of movement.

John

N750A

Defects happen. A penny washer could literally save your life. I don't see any questions here.

No issue using a stainless steel washer here. No need for AN.

A search of AC 43.13 for “rod end bearing” produces precious few results, none of which discuss an oversized safety washer. To me, and acknowledging if it makes you feel safer, then do what you want, but the only relevant mention I found to this discussion is “Cracks and subsequent failures of rod ends usually begin at the thread end near the bearing and adjacent to or under the jam nut. (See Figure 9-5.)”

Go to Pegasus Auto online and buy Rod End Safety Training washers. Up size your AN bolt to give at least 3 threads on the nylon lock nut. Changed all 8 rod end bearing. These washers allow axial deflection of the bearing because they are angled away from the bearing. I have had bearing separation during flight in the Air Force. A training washer allowed for safe landing.
Sorry spell check Retaining Washer not Training

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service