June 2009 Blog Posts (29)

Search Blog Posts

Fall River Mills Flyin

Qsp attended a flyin at Fall River Mills last sunday a pancake feed and did they feed us. Eggs cooked to order extra large ham slice great pancakes and a host of freindly flyers. We had two xl's there and our demo 701 stol. Brad Demeo and Steve Smith were the xl owners. The show was over at 2: oclock after departing Steve left to go find more airports that he has not landed at. This appears to be getting harder in CA for him Steve has been to almost all small strips in the state. Brad and I… Continue

Added by Doug Dugger on June 30, 2009 at 5:13pm — 1 Comment

CH601HD Bungee & Gear Leg Replacement

Well... Yesterday I started into job on the CH601HD that is very much like force feeding a Porcupine to a Grizzly Bear ! I used an ATV jack to lift The Zen, there is no weight the wings... its a "Plan B" thing. Grantley Este & Bob "Mr. GoodWrench" Braden pitched in to get me started on the job I have been putting off for a year now. Changing the out of date main gear bungee (5 yr replacement cycle), so far it has taken 3 guys the better part of a day to jack up the aircraft and get the gear… Continue

Added by Bob McDonald on June 26, 2009 at 7:44pm — 1 Comment

So long Gary. RIP

For all that are interested, this is the final report from the ATSB regarding the loss of Gary Sweetnam, the Aussie Zenith agent and his 601xl demo plane.



Regards
Phill Barnes



AE2008029.pdf

Added by Phill Barnes on June 26, 2009 at 7:27am — No Comments

"Roughed" out a few parts on the water jet...


Added by Travis Corbin on June 25, 2009 at 8:43pm — No Comments

Builders: Share Your Success Stories

As the following two magazine excerpts show, builders are urged to share their project completions. This is a great way to show the aviation world what you have accomplished, while giving you an opportunity to publicly thank those who helped you along the way.

(Above is from Kitplanes magazine; below is EAA's Sport Pilot magazine, both June 2009 issues).

Both magazines invite you to send in… Continue

Added by Zenith.Aero on June 23, 2009 at 9:50am — No Comments

Zenith "Spring into Summer" Open Hangar: Saturday, June 27, 2009

This Saturday is our second "Spring into Summer" Builder Fly-In Gathering and Open Hangar Day.

As opposed to our annual fall Open Hangar Day with scheduled workshops and forums, this June event is very informal and unstructured.



Join us for breakfast on Saturday morning:

Early Saturday morning, Glenn and Anita Riley are hosting their annual "Fly-In / Drive-In Breakfast… Continue

Added by Sebastien Heintz on June 22, 2009 at 10:19am — 4 Comments

Back to 801

The next two weeks have been dedicated to the 801 and the panel for the 750.

Added by Mark Townsend on June 21, 2009 at 8:00pm — No Comments

Videos: Open Hangar Day / Builder Fly-In Gathering

Here are a few video clips from last year's Zenith Aircraft Open Hangar Day. This year's spring event is on June 27, 2009, and the fall 18th annual Zenith Aircraft Open Hangar Day is September 19, 2009.



Video clip from the fall 2008 Open Hangar Day: Inside the Zenith Aircraft factory. Additional activities included workshops and forums, as… Continue

Added by Sebastien Heintz on June 20, 2009 at 7:00am — No Comments

My REAL blog...

I have a complete blog about this project (and my other projects) at my personal web site.

http://www.hainesengineering.com/rhaines

Added by Robert Haines on June 19, 2009 at 8:00am — No Comments

A Week with my Son

It has been awhile since I have spent time with my son so I have dedicated the rest of the week to a camping

trip on an Island in Georgian Bay.

i have been assigned to a cabin with nine 11 year old boys, now I keep asking myself why did I leave the… Continue

Added by Mark Townsend on June 16, 2009 at 8:00pm — No Comments

N601LV First Flight!!! Corvair powered 601 XL

601firsttakeoff.wmvIt's getting kinda late down here but I wanted to put a quick post up letting the Zenith community know that our 601XL flew for the first time today. As posted before it has a standard William Wynne corvair engine w/ a Dan Weseman 5th bearing, Dynon efis/ems, and Garmin avionics stack. Updates to follow

Added by Louis Kantor on June 16, 2009 at 12:30am — 9 Comments

QSP & Golden west flyin

Golden west flyin has come and gone as most things do. Lori and I at QSP were able to host a number of builders and flyers that brought their planes in. Christopher Desmond had his STOL 801 on display for friday and saturday next to him was Woody Harris with his corvair powered 601xl. Bob Hathaway came down from Chico CA with his pearl white 601xl powered by a jab 3300. From Santa Rosa came Bob Archibald with his 601xl painted in military colors and a 125 hp lycoming o235 up front. WE also were… Continue

Added by Doug Dugger on June 15, 2009 at 11:26pm — No Comments

pitot location

I am working on my 601 wings presently and have placed the pitot as per Zenith plans and intend to install my AOA in a similar location on the opposite wing. I noticed that there was some blog activity noting some problems with airspeed indications. Does anyone have experience with pitot problems related to location? If so, what was your solution? Thanks

Added by Peter Shean on June 15, 2009 at 7:21pm — No Comments

More final assembly

Pulled out the airplane from the hanger to take a few baby pictures.

Added by Mark Townsend on June 15, 2009 at 7:30am — No Comments

Zenith Wheelbarrow

I had set off for a day of pattern practice in the hopes of smoothing out my take-offs and landings in the Zenith. The events of the day proved I needed the practice and I learned something about the Zenith 601 XL in the process.



It was my second trip around the pattern at Warrenton-Fauquier airport (HWY) in rural Virginia. It is the airport where I earned my wings in 2000 and seemed like a good place to practice in my new airplane. On this particular landing, I touched down OK but… Continue

Added by JG Ginther on June 12, 2009 at 10:51am — 3 Comments

elevator VG's

About three weeks ago I installed 30 vg's from Zenith Aircraft on the elevator of my 701,they were installed according to the information on a blog on Sebastien's page.They were installed with the front of the vg's on a line 120mm in front of the rivets in the elevator spar.They were installed with a 3M tape used to put emblems on vehicles,the backing is pulled off the tape and the vg is stuck to the tape.When you pull the vg up the adhesive stays on… Continue

Added by John M Brooker on June 12, 2009 at 8:25am — 2 Comments

Wings are back from paint shop

The wings have returned and are now installed.

Added by Mark Townsend on June 11, 2009 at 7:30am — No Comments

Getting there slowly..........

After some months I now have my Zodiac failry close to the state it was in when I bought it but now with the defects resolved. That means I've:



Removed Subaru E81 engine

removed all undercarriage

removed rudder pedals and steering rods

removed engine mounting frame

bead blasted, undercoated and two pack painted engine mounting frame

refitted engine mounting frame

refitted engine

replaced all crimp links in wires with solder joints (yeah, I know some… Continue

Added by Greg Wilson on June 10, 2009 at 7:07am — No Comments

Around the patch. Cessnock to Gennedah for the perverbial $100 hamburger!!!

Here in Australia we celebrated the Queen’s birthday (we're still part of the colony) with a long weekend (6, 7, 8 June), and after experiencing 4 weeks of terrible weather, it was too good an opportunity to not go flying.



First order of the day, the trek to the airport, we are not as lucky as some, as our local airport is 1.5 hours drive from where we live, but the lure of flying is great enough to overcome that hurdle, so on most weekends my wife and I drive up to one of the most… Continue

Added by Eddie Seve on June 9, 2009 at 11:30pm — 3 Comments

side windows for CH701

I am considering installing side windows on my CH701 (project in progress). Has anyone out there done this? What shape/size looks and works the best? A former 701 builder friend stated he wished he had done that on his aircraft and offered some suggestions. The windows will be located above the rear baggage floor.

Added by Don Herbel on June 7, 2009 at 11:25am — 2 Comments

Featured Blog Posts

View All

Latest Blog Posts

Most Popular Blog Posts

Monthly Archives

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

1999

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service