I have been turnd onto a company called Metal Superstore.  They are local so no shipping is good, and they came up way cheaper than aircraft spruce.  For 10 sheets of .020 and 3 sheet of .025 they wanted 843.00 after tax. Aircraft spruce wants 1210.85 plus shipping. Thats 367.00 plus shipping cheaper. How ever they cant get .016. Check em out they have locations all over the US.

I am about to have my 701 finally inspected - next week I hope and have been calibrating fuel tanks, fuel flow etc and am a bit worried about the amount of residual fuel left in my tanks when simulating a downward pitch.



I have built a Czech Kit with the supplied fuel tanks - a bit larger than the American ones being longer at the "thin" trailing wing edge end. They hold 45 litres full and have the fuel outlet at the back inboard corner as with the "normal"…

My friend Mike Mossman and I have been flying our Zodie Rockets for about 6 years now.  His plane is equipped with the Rotax 912S, mine with the Jabiru 3300.  Both are fitted with HDS wings.  The Zodies are a hoot to fly.

We have flown together to many flyin's over the years and it is one of life's great experiences.  The 601's are light and responsive which makes for…

Could someone check these part numbers with aircraft spruce?  They are for a4 and a5 rivits.  I just want to make sure that Im ordering the right rivets.  A4 part #1604-0412  @7000 pcs.  A5 part # 1604-0514 @3000 pcs.

I just want to make sure before I order 400.00 worth of rivets.  Thanks for your time.

Here's a nice series of photos showing a unique banner towing arrangement from this STOL CH 701 light sport utility plane in Guadeloupe in the Caribbean:

#1:  Take-off from water:

#2: The folded banner is on the floating platform, with the towline hanging between the pick up gates on the platform, and a grapple hook trailing behind the airplane:…

Lori and I would like to let you know that Sebastien and Roger will be attending our Oct 8th flyin this year so if you were not able to attend the 20th hanger day at the factory this year you can still meet with them in Cloverdale CA. Will look forward to seeing you there. Check our web site at Qualitysportplanes.com for more info.

One is a CH750 that will be complete using Flight Crafters

Builder Assistance Center.

The other a CH650 (as shown above) was delivered to Tom and Jo Neal.

They will assemble their airplane in their garage in Hernando Beach,…

Here's my follow-up report from our 20th annual Open Hangar Day and Builder Fly-In Gathering from this past weekend.  Despite some rain and cool weather that kept some visitors away we had a fantastic time and a great turnout, proving once again that it's about the people and the planes, and not the weather!…

With the tail feathers completed it's time to crack on with the next item (in order of increasing difficulty) - the wings.

Started by cutting out the rear rib blanks.  I tried the router method described in the Homebuilt Help dvd - unfortunately only got half way around when the bit stopped cutting and jammed.  Not a total loss though, the plywood templates are still useful - now I drill and screw the template through the aluminium onto the workbench, and cut around it with an Olfa…

Hi fellow builders... would you like to have a part in helping to train girls to build Zenith aircraft in West Africa?…

The following is reprinted from General Aviation News (8/31/2011):

Job creation is closely tied to export growth,…