Online Community of Zenith Builders and Flyers
February 14, 2013 Update:
We've posted updated X-Plane flight simulator files for both the STOL CH 750 and now for the Zenith CH 650-B! The new files take advantage of great new flight simulator technology and are optimized for X-Plane X (version 10.20) which now support 64-bit computing power!
Let us know what you…
ContinueAdded by Sebastien Heintz on August 11, 2012 at 9:00am — 23 Comments
The …
ContinueAdded by Sebastien Heintz on July 13, 2012 at 4:00am — 2 Comments
The following was published by GeneralAviationNews.com on July 9, 2012, by Janice Wood
ContinueAdded by Zenith.Aero on July 10, 2012 at 10:30am — 2 Comments
Getting ready for summer (and the hot muggy weather that we've come to expect in central Missouri), we decided to remove the doors of our STOL CH 750 once again.
We decided to add air deflectors along the front of the cabin / door frame to maximize comfort with the doors off. Air (or wind) deflectors are common on European cars - where many folks drive around with their windows open (many cars there are not equipped…
ContinueAdded by Sebastien Heintz on May 16, 2012 at 10:30am — 5 Comments
Bigger and Better Zenith STOL:
We've made the popular Zenith STOL CH 750 light sport utility kit aircraft even bigger and better!
The STOL CH 750 cabin, which by all measures is already very roomy for a light aircraft, has been increased in size by raising the cabin height…
ContinueAdded by Sebastien Heintz on March 28, 2012 at 6:00am — 33 Comments
This is a continuation (See the first post for Day One and Two)
Day #3: First job on Wednesday morning was drilling through all the pilot holes on the main wing. Generous use of clecos ensured…
ContinueAdded by Michael Heintz on March 7, 2012 at 3:00pm — No Comments
I just wanted to post a few pics of the control setup on a 750 , for anyone that had anyquestions and would like to get see pics . i know it always hepls me and i havent seen to may pic of the setup
As you can see just swagged to the clevis on the rudder perdals
and i knew they had to be crossed but i was hoping to do it in the tail section , but there isnt…
ContinueAdded by Tracy Buttles on December 19, 2011 at 3:00pm — 9 Comments
Hello every one,
I have this type of cowling http://www.zenith.aero/photo/dry-fit-cowling-8 and going to be installed to CH750 airframe, for Rotax 912S. The question is dose the engine need in let openings for air cooling from the front of the cowling puting in consideration the high temp. in Saudi where it reaches 47c in summer time.?
Thank you all members for sharing experience …
Added by Adel Alyahya on July 30, 2011 at 9:00am — 4 Comments
(The original post can be found on my build blog at www.stol750project.info/engine-selection.)
Added by Paul Sanders on February 24, 2011 at 10:30pm — 12 Comments
We are right on schedule for the opening of our new Zenith Builder Assist Center. As with everything else there are a lot of loose ends to get tied up but everything is going smoothly.
We are doing our very best to open a truly First Class Builder Assist Center…
ContinueAdded by Bill Carter on January 15, 2011 at 11:03pm — 2 Comments
Hey Everyone,
We spoke with so many of you both at the Zenith Workshops and at their Annual Open Hangar Day this year that I wanted to update you with what’s happening with our New Builder Assist Center.
It’s been unusually cold here in Missouri, home of Zenith Aircraft. The temperature this past weekend was 1 with the high of 12. Not exactly the best weather to be out in the garage building on your project.
Until now the only choices for…
ContinueAdded by Bill Carter on December 20, 2010 at 8:30pm — 5 Comments
I've just returned from a short trip to Brazil to visit the Zenith Aircraft dealer AVIAÇÃO Brasileira Ltda.
One of the highlights of my trip was the opportunity to fly Waldomiro's recently completed …
ContinueAdded by Sebastien Heintz on December 16, 2010 at 1:30pm — 8 Comments
The following article by builder Bob McDonald is published in the current is of COPA Flight, the magazine of the Canadian Owners and Pilots Association. Bob, thanks for sharing your story!…
Added by Zenith.Aero on September 2, 2010 at 10:30am — 1 Comment
Added by Sebastien Heintz on August 11, 2010 at 9:00pm — 4 Comments
Added by Sebastien Heintz on August 7, 2010 at 8:00pm — 4 Comments
Added by Sebastien Heintz on May 13, 2010 at 8:00pm — 3 Comments
Added by Sebastien Heintz on May 4, 2010 at 8:30pm — 1 Comment
Added by Sebastien Heintz on April 23, 2010 at 9:00am — 19 Comments
Doing our best to keep it light it has minimal interior, EFIS, Comm, and Xpnder, along with the 159 lb UL260i engine. Empty weight came in at 701.5 lbs, on digital scales, weighed twice. The firewall forward kit is currently available for any of the ULPower engines, 97, 107, 118 and 130hp.…
Added by Gus Warren on April 8, 2010 at 10:00am — 6 Comments
Added by Gus Warren on July 3, 2009 at 9:53am — 2 Comments
2024
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
2008
1999
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).