Zenith 750 Cruzer, Assembling the rear fuselage

May 08, 2024

Clecoed the rear fuselage. Attached the side skins to the bottom skin. A hint for the future - do not set clecoes on the inside. Set them all on the outside of the fuselage.
Have some problems with predrilled holes. Asking Zenith.
C75F18-1 Vertical L Angle overlaps a hole for C75F6-7 Baggage Back Side Angle. See the pictures. Should I make a small notch on C75F18-1 to clear the hole?
Zenith: make a notch
SD75F4-4 Rear Wing Attachment has holes predrilled for A6 rivets. The part C75F3-3 Top Channel has the holes predrilled for A6. It is ok. But the parts C75F3-4 (see the picture) and LS75F4-1 Side Channel have the corresponding holes predrilled for A5 size. Should I drill them for the correct size A6? Is there a special technology to follow?
Zenith: drill through

Views: 16

Comment

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service