My name is Mr. Michael Mccarthy, I have contacted you before without any response from you. Please replied if you receive this message. I have something very important to discuss with you, I have a vital information to give you. Could you please get back to me on (email@example.com ) for full details.
I noticed on the Zenith Builders comment pages that at one time you had several of those 601/650 wing root fairing kits. #1 - do you have any left? #2 what kind of a price did you get for them? I checked with Roger at Zenith several years and he was reasonably sure that the Checz SportCruiser demensions on their wings were the same as the 601/650's. I checked with them last year and was told they would sell the fairings separate but had to come from across the pond - very high shipping price.My E-Mail address is "firstname.lastname@example.org"
Thanks for the time aloft in your beautiful CH 650/Corvair combo. It was great meeting you and getting some stick time as I move toward my airworthiness inspection. You should be proud of your finished airplane. Exceptional craftsmanship and a real delight to fly.
Thanks for your input and your enthusiasm! Yes, I am going to contact Woody Harris, the West Coast rep for William. He lives about 180 miles south of me. I have also contacted two other individuals in California and Oregon who have a long standing relationship with William.
Thanks for the stats on your 601. Getting 5 gph at 115 mph is about as good as the new fangled "computer engines". This says alot about the engine and as well the quality of the work that went in to the modification of the engine to flight status
I'm new to the group. Just finished the rudder school with my wife at Quality Sport Planes in Cloverdale,Ca. I have located a Corvair engine core in Medford, Or. I live in Redding,Ca.
I plan on building the WW 3 liter engine right by the book with the 2nd gen Dan Bearing.
We had a chance to fly a 601 at QSP. I found the aircraft difficult to see out of and the nose position at landing really blanks out the view of the runway as you touch down.
Doug Dugger the owner of QSP has explained that the 650 has addressed many of the shortcomings of the 601. Great people by the way at QSP. We are lucky to have met them.
Dave, I was hoping you could take a minute or so and give me your impression so far of the 650 Corvair combination and some of the basic info.. IE.. Empty Weight, Cruising Speed, Average Climb with one and two on board. Visibility at cruise, vs on final over the numbers, fuel burn at cruising speed.
Dave, what is your opinion of the Corvair engine now that you have really put some time on the engine. The idea of the engine really makes sense to me, but the proof is in the hours spent behing that spinning prop.
I am asking you because you seem to have flown a lot more hours than most since the time you have flown off your 40 hours. This really gives you an edge on knowing the aircraft and all of its plusses and minuses as all aircraft have them.
Thank you in advance for your time. By the way, congratulations on the incredible accomplishment of constructing your own bird.
Dave: I bought the 2 diodes that I used for both our planes from Digi-Key. The part number is MBR 1060G0S-ND, diode schottky 60v, 10A T0220AC. I ordered them from their website for $1.88 each and had them within 3 days. I didn't see any reason to use more than 10amps and so far, I have not had any problems. The battery I used I bought at Battery Outfitters for $27: Model 12V 7AH SLA UB-1280. Cranks every time! I wouldn't have it any other way. Best of luck! Shayne
Thanks Dave -for the info - I guess what I wanted was the thickness height ot the arm rest in your "seats" photo to try and figure vertical throttle quadrant height- I can't sit in cabin yet so I guess I'll put components on floor to get measurements.
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.