Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Zenith 750 Cruzer, Assembling the rear fuselage
May 08, 2024
Clecoed the rear fuselage. Attached the side skins to the bottom skin. A hint for the future - do not set clecoes on the inside. Set them all on the outside of the fuselage.
Have some problems with predrilled holes. Asking Zenith.
C75F18-1 Vertical L Angle overlaps a hole for C75F6-7 Baggage Back Side Angle. See the pictures. Should I make a small notch on C75F18-1 to clear the hole?
Zenith: make a notch
SD75F4-4 Rear Wing Attachment has holes predrilled for A6 rivets. The part C75F3-3 Top Channel has the holes predrilled for A6. It is ok. But the parts C75F3-4 (see the picture) and LS75F4-1 Side Channel have the corresponding holes predrilled for A5 size. Should I drill them for the correct size A6? Is there a special technology to follow?
Zenith: drill through
Comment
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers