I'm starting to think about how I will finish-out my 750. I understand that the 6061-T6 is very corrosion resistant and doesn't require any protection if kept in a reasonably dry, salt-free environment (like my hangar!) . (I am, however, apply Cortec to mating surfaces.)I'm thinking I may want to spray the interior of the cabin with primer and the main exterior color for simplicity. I would like to put a lightweight carpet over the floor and back of the baggage area, secured with Velcro (that's the way Cessna did my 206). Since that's 6061, would NO paint in the interior area covered by carpet be OK?

What about the floorboard/heel support area? Is it OK to leave that bare - seems like any paint would just get scratched up quickly? Thought I might put some Velcro secured carpet in that area, too. I am planning to use some epoxy primer - it would be pretty durable on a floorboard, but is ANY coating really necessary if you're going to carpet the area anyway?

I "assume" it's OK to leave bellcranks, etc., bare? On the exterior, I assume I'll paint the rudder brackets and other miscellaneous small aluminum parts along with the fuselage. What about the main landing gear? It's 4027 aluminum - does it need paint? I kind of like the appearance of bare, brushed aluminum - would it be a mistake to leave it "naked" or if I want the bare look and it HAS to be coated - is it possible to just shoot a clear coat?

Any advice/observations/experiences appreciated!

Regards,

John

Views: 1773

Reply to This

Replies to This Discussion

John,

You might want to look a little closer at your 750 plans, because the aluminum that is called for in the main landing gear, is 6061-T6, and not 4027.

 

Robert

 

Sorry ... mixing the terminology up! But  6061-T6 is  AMS 4027, isn't it? ("AMS 4027" is printed on the gear leg).  AMS 4027 is the ?alloy? and 6061-T6 is the ?specification?. (maybe it's the other way around ... beats me!) Sooo, back to my question ... does the (6061-T6) main gear need any sort of coating or protection?

Regards,

John

More info: I did a little "Googling" last p.m. From what I gather, some clear coat finishes may yellow with time and UV. Supposedly one of the "best" coatings is Nyalic (mentioned on a Navion website)  - used to be available from Eastwood, but supposedly only available from "professional applicatiors" now. I also found "ProtectaClear" - a self-leveling protectant that sounds great, but I haven't found any independent reviews ... looks promising.

John

Hi John
I have not put any type paint or coating on the main gear of my 601 XLB 
And I have over 300 hrs and the plane is hangared it still looks as good as the day I put it on 
Cheers
Allan

I put brush on Rhino liner on the floor boards of my first 801. I also put in drain plugs so I could rinse it out after playing in the dirt.  It was relatively cheap, easy to apply, tough as woodpecker lips- I couldn't put a mark on it, just enough grip to be able to get in and out without risk of a slip when wet, dampened sound and vibration very well, brought it up to seams at vertical edges so that could keep moisture out of there too.

Going to use it this AC to also line under the seat area where battery sits - just in case.

Nice

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service