Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Discussions (5,814)
| Discussions | Replies | Latest Activity |
|---|---|---|
Routing brake linesHi Gents, Any tips for where and how to rout the brake lines from the master cylinders to the main gear brakes for. 750 Cruzer? John Started by John A. Minatelli in Open Discussion Forums (non model specific) |
1 |
Sep 3, 2016 Reply by Tom Sullivan |
Dimpling Wing Skin for Flush Fit Access CoverWe'd like the Access Covers on the wings to fit flush. I purchased a Close Quarter Dimple Die (from Cleveland Aircraft Tool) to use with t… Started by Loren Warner in Open Discussion Forums (non model specific) |
5 |
Sep 3, 2016 Reply by Jerold Ebke |
CH 750 Cruzer_Elevator Hinge_Hinge Pin MovementHello All, I have just completed the horizontal stabilizer, less the elevator and have a question about the elevator hinge pin and it's fr… Started by Tyler Kratochwill in Open Discussion Forums (non model specific) |
2 |
Sep 2, 2016 Reply by Jay Carter |
Moving aircraft outside of the test area prior to the 41st hour?Here's an interesting set of circumstances to consider: I have 31 of my 40 phase one test hours completed. My plane (N969BC) is based @ KZ… Started by brad cohen in Open Discussion Forums (non model specific) |
3 |
Sep 1, 2016 Reply by Larry Zepp |
Newbie with big boxOkay. I'm going for it. Hooray! First snag. How do I safely get that big box from truck-bed level to ground level in my driveway? Started by Rich M Ward in Open Discussion Forums (non model specific) |
9 |
Sep 1, 2016 Reply by Rich M Ward |
jacking a 601 HDS tail draggerI recently purchased a 601 HDS tail wheel aircraft and was provided a mountain of documentation and information by the previous owner/build… Started by Kenneth Gates in Open Discussion Forums (non model specific) |
6 |
Aug 31, 2016 Reply by Bob McDonald |
Up and Coming ADSB Requirements What are folks doingSo been flying the 601 for close to eight years now, and " Rivet the wonder plane" as my wife calls her, is flying great..... However, … Started by Juan vega in Open Discussion Forums (non model specific) |
9 |
Aug 30, 2016 Reply by Rodney Wren |
4' x 12' Workbench for saleI am selling my custom made 4' x 12' workbench. I made it with 3/4" sanded plywood, 2"x 6" supports and 4" x 4" cedar legs (six of them) w… Started by David DeAvila in Classified / For Sale Postings |
0 | Aug 30, 2016 |
Must Sell my 650 Project Rear Tail KitUnfortunately my project is not to be...I am compelled to sell the rudder and stabilizer sections that are 90% complete. New, unassembled… Started by David DeAvila in Classified / For Sale Postings |
0 | Aug 30, 2016 |
Looking for PIC bubble door for CH750Looking for a PIC side bubble door for a CH750. The original popped open on take off and will never be the same. Steve 417 850-1451 Started by Steve Burnett in Classified / For Sale Postings |
3 |
Aug 30, 2016 Reply by Timothy D. McCall |
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
