Hi Gary,

I will certainly consider that, but I will have to do more research. My initial research on the Ellison website looks like setting up the priming system when using the Ellison will be more difficult that with the Rotec. Did you run primer fuel lines to each of your cylinders?

Thanks,

Mike

H iGary: Long time no hear, I guess things are quite in the Zenith world. How is things going for you? I,m back flying after the up-grade, airport shut down.

I,m having high EGT and the tem's from one cyl. to the other is not to even. What are you useing from your air box to the carb? I have SCAT tubeing right now. If you are useing SILICONE hose tell me where to get it.

BTW how is the towbar working for you?

BEST REGARDS

GENE 601SX

Gary,

I haven't been keeping up on this site in recent times, but was glad to see your invitation. Your experience and expertise goes into areas where I haven't been. Of particular interest to me is a way to better balance my prop. I don't feel my installation is as smooth as others apparently are, though I've never had the opportunity to check vibration levels another Corvair equipped plane. 

 

Gary

got any photos of how you installed the Auto Pilot servos??

I am going down that path myself

Gary, Thank you again for sharing your experience with me. I am considering either the Jabiru or the UL 350 which both weigh about the same. Both groups of course have idealized their mounts etc., hopefully for the best W&B which at this point is only some idea that I am aware exists. I will learn more as I eventually take flight lessons and get closer to completion. I am surely encouraged by your report of better takeoff and landing characteristics with the gear where I have it. The best to you. Jerry Ebke

Gary. Just saw your reply on canopy issue.Discovered prebent hoops for mid canopy rollover do not conform to drawings.Will see if ZAC will replace. I see notes about you being gear forward. I used Grove gear and plans called for it to be straight edge forward and this is how I mounted mine. If this is how you are set up, has it worked OK. Thanks. Jerry

Hi Gary: I told you my tow bar was made from 1 1/2" pvc. Well its not its made out of 1" pvc.
regards GENE

Gary: thanks for the reply and comment. Is the a.c. tail heavy after you turned the gear around? I have a friend who told me we could not step on his a.c. at the same time, or the tail would hit the ground. I don't know switch way his gear is on. My gear is where its puts the wheels to the back, and as i stated you have to pull the a.c. off. how did this affect your CG? I have a Jabiru engine(light). The tow bar is made out of 1 1/2" pvc pipe. I made it about 1/2" narrow than the wheel fork, where it will hold tight.
GENE MAYO

Hello Ray: I notice you turn your gear around, Have you notice the A.C tail wanting to hit the ground when one gos to get in th A.C.? I too have trouble with having to pull the A.C. off on take off. I only have 7 hours on my plane when I started the up-grade. About finish, will pull wire next week. Thanks in advance fot the information.
GENE MAYO
601SX/JABIRU