need a pilot to deliver a CH-701 from Sullivan Airport (KUUV) to Phillips Field Airport (MO23) near California, MO

Bau%20des%20Seitenruders%20Teil%201.docx

Although several years ago, I recollect that the wing root skins when clecoed to the uninstalled wings looked pretty smooth and unbuckled,  a tough job but nicely executed.

Now as I try to install the wing root skins w the wings on the plane,  trimming to clear the skylight per the plans and manual. It seems no matter which way I start clecoing them on, I cannot get away from having a stressed, buckled wrinkled mess (and thats just me). I keep coming back to: Am I sure this is…

Congratulations to Hamish Crowe for his first place finish at the 2023 New Zealand Bush Pilot Championships in Omaka, New Zealand, on Saturday, February 4,…

The tail kit minus the rudder arrived today.  No forklift blade shaped holes or obvious signs of it being drop kicked all the way from Mexico,…

601-XLB - 600 hrs - top rudder hinge rivets loose. Noticed a bit of play lately - barely noticeable by pushing up on the bottom of the rudder at the tip. I thought it was a bit of wear at the hinge bolt. It seemed much worse today. Just took a closer look and the rivets holding the top hinge to the rudder are loose - noticeable movement between the two.  Red X - Code 3 - Grounded.

So now the rudder needs to come off - I think.  Wondering if I can replace the rivets without…

At the start of January, David Tillema and his Zenith CH 750 Cruzer, powered by the Viking 130 engine, took to the air with a new challenge.

To those unfamiliar, Dave completed the "48 State Challenge" last year, departing from his home in southern Texas, and landing…

All-electric Zenith "Sky Jeep" completes first flight, with plans to transport doctors and medical supplies in remote areas of the world

A pioneering UK aviation project aimed at bringing healthcare to some of the most remote parts of the world is a step closer to take-off after its…

Russians left over 30 bullets in my hangar, before they pulled the door with BTR. It looks like they tried to start the airplane with prop covers on. Luckily they left it alone with no damage. They took lots of tools, ATV, car, tv and pillows from our cottage. But they showed no interest in aviation souvenirs to bring back to Siberia.      …

This is very funny.  Y'all need to be sitting down.  

ON A WING AND A PRAYER…

Hello folks,

I have found a supplier in Surrey, B.C. willing to help source the aluminum. Metal Mart in Port Kells may be a key ally in the hunt for sheet goods. For contact info, feel free to email me here.

I don't know if it has already been done before but I am compiling a spreadsheet takeoff of all the aluminum (and steel) required for the construction of the 750 STOL. I can't guarantee its accuracy other than to say I will be ordering from this.

I am also using a…

Zenith Aircraft…

Recieved the Flight Authority from Transport Canada today, Looking forward to the Phase 1 testing.…

Has anybody put a variable pitch prop on a ch601 hds, I am thinking of a Woodcomp SR3000, but I would like to know if anybody has already done it. What improvements were there ? How did it effect the C of G, anybody in the UK done it and passed it with the LAA. Any help appreciated.

Hello all,

So plans should arrive this week for a STOL 750. My son and I have made a family pact to build this aircraft over the next 5 or 6 years while he goes through air cadets. The finished craft will be his reward for getting his PPL.

We are both very excited to scratch build and kit build as the finances allow. I'm a shipwright and a journeyman carpenter with a lifetime experience in fabrication in composites, metals and wood. I'm hoping that some skills will benefit an…

Just ordered a 750 SD kit.  Delivery May-June 23.  We have received the tail section to get started.  Looking for ideas on building a shop table, size, material, leveling, etc.  Any guidance you can give will be appreciated.  We are a father(Jimmy)/son(Ben) team with no building experience, however, Ben is an A&P and a former IA.  Looking forward to getting started.

Friday, Dec. 2nd: hands-on workshop  |  Saturday, Dec. 3rd: Regional Zenith fly-in…