Carl Orton
  • Male
  • North Richland Hills, TX
  • United States
Share on Facebook

Carl Orton's Friends

  • Mike Chapman
  • Kenneth Stapleton
  • Oliver Reik
  • Rob A
  • Allan Gratia
  • charlie rosenzweig
  • Gary Reed
  • Mark Pensenstadler
  • Wayne Brazinski
  • John M Greiner
  • Brian Thomas
  • R. Thomas Herr
  • John Bell
  • Don Morrisey
  • christopher fryatt

Carl Orton's Discussions

Bad Ambient Noise in Comm Mic

Started this discussion. Last reply by Carl Orton on Tuesday. 7 Replies

My comm (iCom A200) works just fine. However, my Cruzer generates so much background noise with the engine, rushing air, any fuse noise, etc., that in flight my comms have a LOT of background noise.…Continue

Changes for the Zenith Annual Banquet at Oshkosh - 2024?

Started Jun 15 0 Replies

Please do not shoot me for asking a sensitive question.First, background:  My wife and I have attended just about every banquet since 2017. Not 100% attendance, but most years. We try to hit it…Continue

FlightCom IISX Portable Intercom Co-Pilot Xmit

Started this discussion. Last reply by Bob Simmons Jun 2. 5 Replies

Hi, all;I have a Cruzer with only one set of headphone/mic jacks. I purchased a FlightCom IISX portable intercom. Appears to work well in the intercom function.However, my CFI would like the ability…Continue

Has anyone used the FAA Additional Pilot Program for Phase 1?

Started this discussion. Last reply by Perry Hyden Mar 12. 4 Replies

In the dark crevasses of my mind, I'm arguing with myself that I already posted this query, but cannot find it...I'm curious if any builders have used the Additional Pilot Program for their flight…Continue

 

Carl Orton's Page

Latest Activity

Carl Orton posted a discussion

Bad Ambient Noise in Comm Mic

My comm (iCom A200) works just fine. However, my Cruzer generates so much background noise with the engine, rushing air, any fuse noise, etc., that in flight my comms have a LOT of background noise. The tower *can* understand me, but they do note the background noise.I'm running my headset into a flightcom portable intercom. I have not tried to talk without the intercom, so I have no idea if I'm picking up both mics, adding to the issue or what....Has anyone else had similar issues? Any…See More
Nov 15
7 Comments
Carl Orton posted a discussion

Changes for the Zenith Annual Banquet at Oshkosh - 2024?

Please do not shoot me for asking a sensitive question.First, background:  My wife and I have attended just about every banquet since 2017. Not 100% attendance, but most years. We try to hit it regularly.We missed in 2022 (first year of being at the Mineshaft, I think) because of a camping issue that basically resulted in threats to have me take my wife to the airport and she'd fly home by herself (rental camper that was horrible). So we didn't attend in 2022. I was basically shut down the…See More
Jun 15
0 Comments
Carl Orton posted a discussion

FlightCom IISX Portable Intercom Co-Pilot Xmit

Hi, all;I have a Cruzer with only one set of headphone/mic jacks. I purchased a FlightCom IISX portable intercom. Appears to work well in the intercom function.However, my CFI would like the ability to transmit as well. Technically, he *can*, since both mics are live when I press the PTT on the Y stick. However, he'd like his own PTT.FlightCom makes a PTT Gold switch, but user reviews say that if you use this switch, co-pilot loses intercom functionality.Anyone in a similar situation? How'd you…See More
May 30
5 Comments
Carl Orton posted a discussion

Has anyone used the FAA Additional Pilot Program for Phase 1?

In the dark crevasses of my mind, I'm arguing with myself that I already posted this query, but cannot find it...I'm curious if any builders have used the Additional Pilot Program for their flight testing.  I have a bunch of questions, but I'll take the relatively easy one first....Did you follow the AC to the letter? As in, it seems there's a lot of information they want in the pilot logbook such as qualifications of the "Qualified Pilot", "Builder Pilot", and Observer Pilot.Along with the…See More
Mar 11
4 Comments
Carl Orton posted a discussion

Cruzer GRT Fuel Sender Calibration frustrations

Hi, All;Received my AW cert the end of June, then prep for OSH, and upon return we've had 28 or more days of over 105 deg temps. Frustrating to get stuff done when you're stumbling all over from heat exhaustion!Anyway, I've started calibrating my fuel senders. Std Zenith supplied VDO senders. I have a GRT Sport EX EFIS and model 2004 EIS. Fuel senders wired to the analog inputs of the EIS as per GRT direction. The GRT wiring diagrams say to use 470ohm resistors in the excitation voltage…See More
Aug 28, 2023
4 Comments
Carl Orton posted a discussion

Adhesive residue on bubble doors

I know solvents can destroy poly acrylics, so treading carefully. Do we know what the bubble doors’ composition is and/or what solvent may be used to remove adhesive residue after the protective paper is removed? The left window paper separated just fine, both inner and outer. The right door, however, has about 1/3 of the outer surface quite heavily coated with adhesive. Inner surface is clean. thanks for your insight. See More
Apr 17, 2023
5 Comments
Carl Orton posted a discussion

Large washers next to rod end bearings?

I assembled my fuselage several years ago. I recently had a follow up tech counselor visit, and they said they were surprised that I didn’t place large (1”+) washers on the bolts next to the rod end bearings. Allegedly the bearings can fail, and with no washer, the rod can slip over the nut, resulting in Bad Things. The plans make no mention of this situation or mitigation. How many have used the washers?Thanks!See More
Apr 4, 2023
12 Comments
Carl Orton posted discussions
Jul 13, 2022
Carl Orton posted a discussion

Got start fixed; now hard to start

sighWell, folks, I had a no start problem that turned out to be the mags installed 90 deg out such that firing order was 3-2-4-1. Got that fixed and it fired right up.HOWEVER.Tried the second start this evening.  Could not get it to start. I HAVE NO PRIMER installed. Had to shoot some starter fluid (ether( into the air filter, then it fired right up and ran great.Should I just pump the snot out of the throttle more? I probably pumped it 5-6 times. Didn't want to flood, but obviously I'm aways…See More
Mar 27, 2022
7 Comments
Carl Orton posted a discussion

O-200 Won't start, pop, cough, anything...

Very frustrated.I rebuilt my own O-200. I have significant engine building experience from a prior professional life as a Chrysler tech. I also built my own AeroVee VW conversion for my prior plane, a Sonex. I know, I know, it's not the same. One mag was less than 75 hrs when the core became available. I sent the other mag to our local mag shop for 500 hr servicing. The MA-3SPA carb also had less than 75 hrs on it, so I did not send it out for overhaul. I could put 100LL into the fuel bowl,…See More
Feb 28, 2022
10 Comments
Carl Orton posted a discussion

MA3-SPA Initial Mixture Setting?

Hi, All;I've been trying to get my O-200 to fire up so I can then take the plane to the hangar. However, no joy.I thought I had spark issues, so double-checked the crank/cam timing, firing order from #1 cylinder, plug wire orientation, distributor timing with the mag synch tool, etc.So, I sprayed some starting fluid in the air filter. THAT got some results, so I know that SOMETHING is at lest providing a start.So now I'm concentrating on fuel.Just to make sure, how many turns (?) out from fully…See More
Feb 23, 2022
2 Comments
Carl Orton posted a discussion

Preferred oil pressure sensor location?

When I stripped down my O-200 for overhaul, the oil pressure line was a port on the passenger side of the crankcase. yet it seems like most folks now refer to add the sensor to the tap location on the oil filter adaptor. does it make a difference?See More
Dec 14, 2021
3 Comments
Carl Orton posted a discussion

Removing friction lock from throttle cable?

Like many others, I have installed dual throttle cables in my Cruzer.I've seen a few comments about removing the friction lock on the right side cable just to ensure that the cable isn't locked when you need it most.So....HOW do you remove/disable the friction lock? Standard McFarlane cable....Update: duh...called McFarlane; all one does is remove the black knob, then unthread the knurled lock knob and remove the leather packing material jammed in there. Reinstall the lock and plastic knobs and…See More
Oct 15, 2021
0 Comments
Carl Orton posted a discussion

Source for carb heat box locking stud and cross pins

I'm finishing-up the connection of FWF wires etc to my O-200 Cruzer.I purchased the Zenith FWF kit, which came with everything.I had a heckuva time installing the tiny cross pins into the bottom of the air filter mount studs.  I'm talking the studs you push thru the filter and gasket and act like a dzus to hold everything onto the sheetmetal carb heat airbox/valve.  These are TCM parts - 28306 and 28308. Spruce has 'em, but they're priced at $60 for ONE stud and $32 for ONE tiny little cross…See More
Oct 13, 2021
2 Comments
Carl Orton posted a discussion

Any Zenith folks staying in Sleepy Hollow in the next few weeks?

Hi, All;I was just curious if any Zenith folks were going to be RV'ing it (4 wheel kind) at Oshkosh this year and staying at the Sleepy Hollow campground.Ulterior motive is to perhaps hitch a ride to the Zenith banquet. But, of course, we'd love to just sit and chat over a few cold ones as well!See More
Jul 8, 2021
0 Comments
Carl Orton posted a discussion

O-200 Starter Mount Bolts

Hi, All;Has anyone found a source for the upper starter mount bolts? The 5/16-16 x 3 5/8" bolts?I have the ones that came out of my core, but there's no head stampings, etc., to let me know how good they are. A standard AN5-32A bolt is a -24 thread, and the accessory case is a -16.  As in, I don't know if the past rebuild shop just went down to Lowes and got a 5/16" bolt out of the parts bin.....See More
Jun 23, 2021
6 Comments

Profile Information

Aircraft Model
CH 750 Cruzer
Project Status
Just started
Building From
Kit
Engine installed (or plan to install)
Continental O-200
Your website (about your aircraft...)
http://Mykitlog.com/corton
Building Experience
Have already built an airplane
Flying Experience
Private Pilot
Building and Flying Info / Your Profession / Other Background Info
Had a 172; sold it and built a Sonex. Test flew that, sold it, and now have purchased Cruzer plans. Will buy the kit after I have the chance to test-fly it!
Home Airport (ie. KMYJ)
KFWS or 52F

Carl Orton's Photos

  • Add Photos
  • View All

Comment Wall (3 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 10:48pm on August 17, 2020, Oliver Reik said…

Hi Carl, Thank you for getting back to me. I also reached out to Falcon insurance, i will let you know about their response. Oliver

At 7:37pm on August 14, 2020, Brian Thomas said…

Carl-

Sorry, life took over my build for a while. I think I'll skip on the tool for now.

-Brian

At 10:28pm on July 30, 2017, Kenneth Stapleton said…

Hi Carl

Welcome to the Zenith family! I see in your profile that you are planning for the Cruzer. The Cruzer is a fantastic plane! If you get up to the factory, a demo ride will be in order. My wife (Sharlene) and I were there in June for 3 days and we were VERY impressed! We found all the folks at Zenith to be warm, friendly and honest. Not once did we see any kind of sales pitch...their business model is one that relies on the reputation of the product they produce. They were having an Open House while we were there so we had a chance to speak with quite a few of their customers (builders). We were amazed to find that many of them were building their second or more Zenith kits...quite a feat for an industry that sees new companies come and go so frequently!

We are heading back up to the factory in September for their 25th anniversary bash and will be bringing back more of the CH 750 STOL kit. Hopefully, we will see you there!

Ken and Sharlene

 
 
 

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service