I cut my first form blocks and cutting blocks from some scrap plywood. I borrowed an 18v cordless jigsaw and cut them last night (in my room- I'm sure my room mate loved that, but I swept all the sawdust). Then over lunch today I took the rough cut parts to a tent that has a disc sander and finished them up. I'll have to duplicate them with a flush trim router bit when I get home, but that is easy enough. I may even rough cut their mates here so I can flush trim them when I have access to my…

Project on gear, veertical stab and horizontial complete, MAC servo in horz., Rotax 612, prop, oil and water radiator tested, locker bay tanks, air craft instruments, flight instruments, Comm, Encoder alt., Marrow II GPS, Fuel senders, extra Matco brake units, parts for dual stick control. Plans

Location: N. Alabama 256 233 4839

$12000.00

I found a tent with some wood working tools and made friends with those who own it. I took my patterns and have glued them to some scraps of plywood. I'll cut them out with a jig saw, then sand them on their sander. 

We're nearly ready for our next big adventure at "AirVenture!  We hope you can join us!

Here is a summary of some of the planned Zenith activities. 

Zenith Builder Dinner and…

What speed those of you with a 0-200 get at cruise

Zenith Aircraft Co. will host its second “Engine Day” at the company’s exhibit at AirVenture in Oshkosh on Thursday, August 1 from 10 am to 2 pm. The company will have a number of Zenith aircraft with different installed engines on display, as well as representatives from a number of engine manufacturers.

In 2012, Zenith hosted its first “Engine Day” at Oshkosh, with a handful of different powerplants and their representatives on hand. “We didn’t know what the response would be,” said…

Our China dealer is looking for a few pilots. All paid trip with spending money and you have a fun time flying.

For more information, please contact David in the USA at
davemargolin@comcast.net

I haven't been able to work on my project in better than 3 months, life sometimes life just gets in the way.  I gave up trying to make a plug to mold to my wing tip with no success (some things I guess I just can't do).   I purchased the tip from Zenith and cut it down to use only the forward portion and I am very pleased with the fit.  I was a little worried that being plans built skins I may have some major working to do but I didn't.

Rookie question but would like some clarification before proceeding. My plans are Edition 2 Revision 1. I am drafting a form mold on paper before transferring it to wood. On the Wing Nose Rib (75W1-1) drawing, I am assuming the R53 radii measurement is from the tooling hole (190,32) and I have drawn it accordingly. On the plans, however, there is also a spot above and to the right of the tooling hold at x=175mm. Is there a significance to this 175mm mark that I am overlooking? Thanks for…

Exciting times in the New Zealand home of EquiAvia!

I moved my aircraft Project into my new hanger and building has resumed with a feverish intensity!

I am documenting my build using my iPad mini and the app we created. With over 250 users so far, the app is gaining…

Just a note to let all know that Quality Sport Planes your west coast reps for Zenith Aircraft will not be at the Arlington air show this year do to illness. Will still be taking calls for any reason at QSP in Cloverdale CA  it will be business  as usual. Next scheduled airshow will be at Copper state Ar. in Oct. We apologize for any inconvenience this may cause to any of our customers. 

My Rotax 912ULS has been using oil since new.  Lockwood Aviation tells me this is not normal. I experienced reduced RPM on takeoff July 4 and had to return for landing. my first since returning from the June 22 Zenith Fly-in at the factory.  #1 cylinder has low compression and badly oil-fouled plugs. I have only one year and 68 hours operation on the engine.  ASB 912-062 applies only to cylinders 2 and 3 and not to my serial number. Anyone experience a similar problem out there?

Hi Builders I am on a CH 750 and have completed my tail the slats and flaperons, now going to start on the wings, will get some pictures together later.

Our Chinese dealer is looking for Zenith builders or aircraft technicians to help

assist in the assembly of our CH-801 aircraft. You need experience assembling a CH 801 aircraft kit.



This opportunity includes all travel expenses, lodging & food and decent wage, including wonderful sight seeing

excursions.



So, if your looking for an exciting adventure for a few months (or more) in

The People's Republic of China, this could be it!



This may…

thats a "701" :)

Im building a 791 with students and we are finally , after 7 summers, getting to the finishing touches.  I have no idea about paint prep, type, application etc.  any help out there?

jay

Here's a screen shot of the Zenith CH 750 Cruzer cabin as seen in QuickTime VR.

Download the high resolution Quicktime VR panoramic file to tour the Zenith CH 750 cabin in stunning high…

My 601XL has a 69" 48 pitch currently, with a C-0200 rated at

125 HP.  At 2300RPM I am just at 100MPH, I want to be at 115MPH

at 2100RPM (RPM X Pitch X .000947 = MPH), This would call for a 69" 58 pitch prop.

What are other Flyers out there using on 125HP engines for Dia. and Pitch?

Also is 115MPH cruse acceptable and safe.

This 601xl has the wing mod.

PS: Getting 125HP out of a 0200!!, 10-1 comp pistons,…