Whoo Hoo!

Received my Special Certificate of Airworthiness from Transport Canada Today.

3 1/2 years of pushing myself and learning new things. Wow, what a ride that has been!

Thank-you to everyone on this site who has asked questions, answered questions, made comments or contributed in any other way to this fantastic community.

Would not have done it without you!

Cheers,

Bill Moore

C-FFWF Stol CH750 UL 350is

First, if you missed Sebastien and Roger's news presentation, here it is again.  Very nice video.

My airplane will be at a display next to Zenith as always.  I made some personal changes with my friend Vern to the airplane.  Come have a look.  Right now it is being wired for some new fuel pumps.…

Today is the 6 year anniversary of opening up the rudder box in my living room and drilling the first hole. Even though I only get to work on weekends, and on weekends outside of the summer when it isn't 110+, I had kinda thought I'd be done by now. But if I've learned one thing on this project is to take all estimates and double them: and expect it to take longer than that.

While we are firmly in the 110s, I have managed to sneak some early mornings in this summer in an…

I completed most of the fabrication of the nose gear bottom bearing. This was a fun little machining project.

It gave me a chance to make use of the boring head for machining the hole for the nose gear leg and the sine vise for accurately cutting the angles.

Almost finished result. I still need to split the bearing and drill the various holes,…

Don't forget the Homebuilthelp fly-in in Brussels Wisconsin the Saturday before Oshkosh.  Bill and Peggy will be there to get a ride behind a Viking powered Zenith at Jon's grass field.…

The inaugural year of the West Coast Zenith Fly - In is now in the books, and it was a success.

This event was held in Arlington, WA during the annual (and great) Arlington Fly In.

Despite very threatening weather, we had seven zeniths show.

A 750, a 601, an 801, and four 701s. Two of the planes were from California!

We also had about a dozen active builders join us, which may be the most rewarding part of any fly in. Ideas and tips…

I decided to change the WW front starter, flywheel, John Deere alternator, and harmonic balance for rear mounted stuff to not have interference with my plenum ducting and to fit a new cowling.  So I will have the above stuff for sale. Also a SPA metal cowling with carb heat. New, never mounted and very nice.

I am replacing my first generation bubble doors with tube supports on my 701 with second generation bubble doors with fiberglass support for the acrylic .  Does anyone out there have any experience with this?  Will I have to alter the sill height?  Will the hardware transfer to the new door?

Thanks, Vann

https://www.youtube.com/watch?v=5dOawCDrj0U https://www.youtube.com/watch?v=cJe9Ot4sVIwI haven't posted much in a while because I have had my head down trying get my CH750 done and flying. It is mostly plans built with the steel parts and finishing kit from Zenith. This is the 4th one completed out of the six of us here in Lethbridge, Alberta who have worked co-operatively to…

We had our first Builders/Pilots Chat last week and out turnout was a respectable 15 builders. The next chat is planned for June 28th at 8 PM EDT.

For those of you who missed the chat, the log is linked below. Enjoy!

Zenith.aero Tuesday Chat Log June 21st 2016

Nice article on RAA Chapter 85's Zenith CH 750 Cruzer build project.

• Read the article: Aviation-News-Article-RAA85-Cruzer-Project.pdf
• RAA Chapter 85's Facebook page…

Does anybody know the best way to cut the hole in the slat (of a 750 stol) for the landing light.

Thanks in advance for any ideas?

Say folks... wondering if there is anyone within reasonable distance in and around the Austin Texas area willing (and interested) in getting together to share ideas and builders support?  I am well into my Ch701.. but.. the more technical aspects are challenging, i.e., bending aluminum skins to form elevator.. wings, etc... I would like to get things right the first time around..

After making lots of parts and remaking a few, I finally get to start drilling and clecoing the firewall together.

I mounted the firewall onto 80/20 stock with extra steel angle and magnets so I can work on it standing up.

The 80/20 is connected with hinges, so I can tilt the firewall back  to allow continued loose fit up

to the rest of the fuselage.

The fuselage can be seen behind and is similarly supported with 80/20,steel angle and magnets. .…

Zenith Banquet for 2016

It's time once again to announce the Zenith Aircraft Builders Banquet for 2016! Our event will once again be held at the Oshkosh Elks Lodge, 175 West Fernau Ave, in Oshkosh, on Thursday, July 28. As always we have very comfortable seating, our own private bar, award winning food, and door prizes! The full bar will open at 5:30 PM for people that would like to come and relax early. Dinner starts at 7:30 PM. Tickets are available at the…

NEW Four-Position Flaperon Control Lever for the STOL CH 701

Video: Zenith Aircraft's Roger Dubbert takes his Zenith STOL CH 701 flying with the new flaperon lever:

The new flaperon four-position control lever/handle with the adjustable positions is…

So, I just want to share the excitement in my voice for the taxi test.

If your stuck and need motivation, maybe this will help!

Ill get to fly soon!

Still have items to do but My plane has arrived!!

https://youtu.be/qMsLOxdy7KU