Join us at the 25th Annual Open Hangar Days and participate in the first-ever Cleco Contest at the Zenith factory!…

Plan to camp at the Mexico Memorial Airport (KMYJ) for the 25th Annual Zenith Open Hangar Days and have close access to all of the fun! Mexico's airport…

Roger and I went flying this morning in the Zenith CH 650 to summarize the events at the upcoming 25th annual Zenith Aircraft Open Hangar Days and Fly In coming up in a couple of weeks at the Zenith Aircraft factory in Mexico, Missouri:

Here's more info on the events from …

Fly-in to show off your Zenith during the 25th Annual Open Hangar Days at the Zenith factory in Mexico, Missouri and register your plane to be judged in the…

I've been flying for several years now with a 72" Warp Drive. As my good friend Felipe points out - heavy but reliable. However, no leading edge protection meant that over the years of landing in places an airplane probably should not go, I had a pretty battered prop.

I met with the folks at Sensenich who are just up the road from me here in Florida (I like doing business locally where possible). Their website actually recommends the 68" with a 912S. However, after thinking…

A while back I got hooked on watching The Walking Dead series - one of a number of shows and movies about a "Zombie Apocalypse" where most of the population is turned into zombies by a mutant virus, aliens, government weaponized virus, GMO's,  etc.,  - you get the picture - take your choice! The plot is predictable - a small band of "normal" humans makes a trek to find sanctuary from the hordes of zombies and…

Finally, after having the Cruzer plans for 7 months, the first part was made! It's just a rudder rib, but it does mark the official start of construction. Onward!…

OK folks - I asked this question about 6 months ago and only got one answer. I would think there are several Cruzers flying with the Viking 130 by now, can you all tell us how you have your bird equipped, if it is painted, and what you ended up with for an empty weight.

Thanks!

My wife and I will be touring the South Island for two weeks from 1st November in a campervan. 

Do any Kiwi Zenith members have any advice about aviation related events that are worth visiting while we're there?

I'd be interested in seeing some STOL ops and WW1 replica aircraft.

Best regards,

Shay.

701/912uls

Ireland.

If your finished Zenith aircraft isn't flying quite hands-free and is consistently demonstrating a "heavy wing," Roger and Steve from the Zenith Aircraft kit factory provide an easy fix:

Share with us your additional comments and suggestions below, and let us know how this worked.

Check out the video above of the flour bombing practice drops Roger and Dennis did this morning to get ready for the Flour Bombing Contest at Open Hangar Days 2016!…

Just thought I would post an update on the condition of the vinyl wrap that covers my entire 701, after five years.



In short, it still looks brand new! Everywhere  I go people ask me what it cost for the paint job. They are shocked that my 701 is not painted! They walk up close and look at the rivets and tell me that I am pulling their leg! I can only convince them by showing them a seam.



About three years ago a tire went flat and, since the fuel tanks were full, the upper…

The Zenith Aircraft STOL Competition is a crowd favorite at the Open Hangar Days! The exciting event is sponsored by Kitplanes Magazine and is sure to please the crowd again this year for the…

The addition of new activities and two full days for the 25th Annual Open Hangar Days at…

I flew my CAMit-powered (RIP) 601 to AirVenture 2016. This was its third trip to OSH.  It’s just over 1,800 statute miles each way from Santa Rosa California.

I usually try to work some sightseeing into my trips. I love to fly in the mountains and along rivers. I have spent many hours doing so in the west. This year my idea was to follow the Missouri River…

You are invited  to attend the seminars and engine panel discussion presented at the Open Hangar Days at …

Look who got into Kitplanes! (2nd one down)

KitPlanes Completions

In August 1986, in tiny Stanley, Nova Scotia, I bought a ride around the patch in a 2-place canoe with wings. For 30 years, I studied "Low & Slow" -- the laws, the flaws, the struggles to make it grow. I watched it blossom and evolve, and blossom again. And after I retired, I made a decision, 'pulled the trigger', and bought a kit. In August 2016, a Zenith CH-750 STOL kit arrived outside my single car garage in suburban New York. And now, the journey begins. :-)

My Zenith builder partner and I were looking for a cheap way to house our 750 and 650 aircrafts in a single hangar and save some expense, this is our solution built from a modified Harbor freight lift table.  The 750 is lifted high enough to roll the 650 under the wing and then lowered again.  The table is rated for 1000 lbs. and raises our planes 18" off the floor, we have…

Two groups have banded together for a common goal with EAA Chapter 1083 and John Robinson, the founder of AV84all.org…