10 hours of transition training CHECK

Pre-Flight inspection that was almost an annual CHECK

7 Gallons of 100LL per side CHECK

Taxi out, run it up, take the active, and fly.

It does! and it flies well

Friday September 12 2014  The DAR comes over to inspect N69102 for it's airworthiness certificate. 

No more then 2 minutes into the inspection he finds a castle nut that has no cotter pin.  DAMN!   I was just working on that this morning and I had the new cotter pin laying right beside the pliers i was going to use to put it in.

I quickly fix that while the DAR goes on about his inspection, spending over an hour looking in holes, going upside down in the cabin to look…

Well this is embarrassing, I just realised I haven't posted an update for almost a year!

Left wing is upside down on the bench.  Had a good day on it today, drilled all the pilot holes out to 1/8", clecoed in the front strut fitting, made the strut angle bracket and attached the fitting doubler, and made a start on the flaperon brackets.

Almost bought a Continental C-85 until someone pointed out a forum post on this site advising against it.  Will wait until a good 912 comes…

The Viking engine is removed from it's shipping platform and is ready to install…

Reminder to all Zenith Builders: Zenair offers a wide range of Firewall Forward Packages (FWF) for a variety of different engines for the CH series of kitplanes. These include full packages, individual components as well as engine-related options. For full details, visit: http://zenair.weebly.com/firewall-forward-packages.html.

Also available to…

Anybody have any experience with a Real World Solutions efi in an EA81. It acts like it is not getting fuel. I've checked everything and I'm just about to give up.

Here's a summary of my three days with the EAA One Week Wonder airplane in central Florida earlier this week. 

On Wednesday, we flew by the shortest paved runway (a nice R/C field, just a few hundred feet long) and later that night I had the chance to fly over the longest runway I'd ever seen (NASA's shuttle landing runway at Kennedy Space Center, three miles long!).…

Kind of learning how to use a video editor, much harder than building a plane! Here's a link to the video.                                                       Chris Brown STOL 750 Rock House Landing 

The flight instruments (namely the artificial horizon) is now being driven by the MPU board (MPU9250 -> Arduino -> iMac).

Eventually all of this will be put together and run on a PCduino with its own screen.

More work to be done. Fun, but slow.



Here's a video: https://www.flickr.com/photos/54366879@N06/16476904241/

(Too big for zenith.aero).

Note: the colourful spaghetti of wires is a left…

Google Site built from a template another 750 builder did.

http://N750JG.info

My plane is a factory built AMD Zodiac 601XLB

Attended Rainbow Aviation Repairman 16 Hour course in Lakeland Florida, January 2014

Purchased November 2014, changed SLSA Certificate to ELSA January 2015

Received repairman certificate for the airplane February 2015

Plane has a Dynon D180 with AOA Option, Garmin SL40 Com radio, Garmin digital Transponder, Garmin 396 with air gizmo mount, Garmin Audio Panel.

Approximately…

Here is a real product to wake up your Rotax 912 80 hp engine.

Failure of the Supercharger simply means you have to fly on the original 80 hp.

http://youtu.be/EVqDhmlePXQ

I have compiled the following photos and account of Jeff Badgero's recent flight from Florida to Haiti. 

Jeff and Carol Badgero are missionaries with H.O.P.E. Missions who have been working in the country of…

I have built two zenith kits in the past. My first one a ch701 was built in1991-1992. It originally was powered by a rotax 582 for about 300 hours. The 582 was replaced with a rotax 914 to give superb performance in the mountains where I live. I have put 1200 hours on the 914 now and I have nothing but good to say about the 701/914 combination. The airframe at 1500 hours is in excellent shape.



My second zenith is a ch801. It is completed and has been flying for about 125 hours…

Started on the Horiz. Stabilizer and just finished cleco-ing the front spar assembly.  Logging everything and taking pictures for the final inspectors.  Also trying to keep a good track of time spent.