All Blog Posts (2,409)

Search Blog Posts

NOT SURE WHAT TO TITLE THIS POST - YOU DECIDE.!

Well not sure if I should title this Post IS MY WIFE PISSED OR WHAT, or DO I HAVE THE LARGEST FLEET OF 701'S? Last year while I was coming to the end of building my first 701, a fellow 701 owner had a taxi mishap in his, he decided that he would not repair it and parted it out. I purchased it minus the engine and instruments, hence my second 701 which currently sits in my shop. This last week I purchase a complete new…

Continue

Added by Debra and Patrick Nesbitt on February 14, 2010 at 11:59pm — 4 Comments

More Progress...

Wing skeletons are complete and it we finished earlier than we thought... Oooo, SCAREY! Now to skin the wings and start on the fuel system.

Added by Travis Corbin on February 12, 2010 at 9:23pm — No Comments

A tail in the workshop...

As we finalise the build of the MoM 701, one of the staff went to pick some parts and got a surprise...


She took hold of a lovely Royal Python... or did it take hold of her? Either way she exited the workshop and Matthew, our resident amateur Herpetologist, came in and carefully caught the snake and brought it out to the delight of the young ladies learning to build aircraft.


It disrupted build for a while - but as you can see it did provide some…
Continue

Added by Jonathan Porter on February 12, 2010 at 2:35pm — No Comments

Calibrating the Airspeed Indicator (ASI)

A sometimes overlooked part of the flight test program is calibration of the airspeed indicator (ASI). The airspeed indicator is (arguably) the single most important instrument we have on board our airplane, and it's important that owners/pilots make sure that the ASI has been calibrated (that it has been corrected for errors).

Indicated Airspeed (IAS) is the speed of the aircraft as shown on the airspeed…

Continue

Added by Sebastien Heintz on February 12, 2010 at 12:00pm — 5 Comments

Dual sticks

Does Zenith make a dual stick conversion for the 701,Or do I have to make a conversion of my own?

Added by Wayne Silvan on February 10, 2010 at 10:28pm — 4 Comments

Painting – Why Can’t I do it Myself?

Having sent in a few photos recently of my first attempt at spray painting the tail sections of my 701, I have been invited to commence a blog on the subject. I’ve never done a blog before – nor built a plane for that matter, so here goes:…

Continue

Added by Jock Struthers on February 10, 2010 at 2:00pm — 8 Comments

Bubble door gas struts

Thanks Michael, Jonathan, Phill, Bob, and everybody else who took the time to respond to my request.

You guys have been very helpful.

Michael, I think I will go to NAPA and try your solution since it seems to be working.

I originally purchased two struts from Aircraft Spruce, but I didn't realize they were really for raising a canopy.

They are short and very strong, will not work very well for the larger movement needed of swinging open a door. I envy you guys…

Continue

Added by William Heath on February 10, 2010 at 12:59pm — 6 Comments

Wing Templates and last thoughts

I'm about to start the second wing and this will be my last blog on the Upgrade. I'm hoping to be ready for the Inspection by the end of February, or really close :-)



Expanding on my last blog Nose rib template, I've added another template for the bottom cap angle, 6ZU-1-5. I installed with the bolts to the wing spar using the template to postion and then traced around the cap angle. Removed the bottom Nose rib template and set the… Continue

Added by Jake Reyna on February 6, 2010 at 8:00am — 2 Comments

Latest Update

Finished the holes and splitting of the prototype cowl on Monday, 2/1/10 and loaded the two halves in the car for delivery. Wednesday 2/3/10 was bright and sunny but cold, my wife and I made the trip to Weauwega to deliver the protoype cowl to the factory for final layup. They are loaded with work so I do not expect to see the finished product probably until March. Weather is still cold and I have not installed a heater so will wait for better weather anyway. It was a long day 3 hrs driving… Continue

Added by Phillip Owens on February 4, 2010 at 6:44pm — No Comments

Where I stand now

It has been a while since I have posted, so here is where I stand now.



Back in October I grounded my 601 because of the engine using oil, low oil pressure and just not running very well for very long. What I found was a partial oil ring on the #3 cylinder as well as a few bearings that were at service limits on the crank shaft and cam shaft. I also found a stud that had pulled loose from the crank case under the rear cam shaft journal, so the case needs to be line bored also. I also… Continue

Added by Glenn Johnson on February 3, 2010 at 8:09pm — 4 Comments

VGs on the CH-750...... wings, elevator or rudder?

I have been reading various articles about how VGs help in the flying characteristics and landings of various aircraft and I plan on using them on the elevator of the CH-750 as Zenith suggests. But I have a question for any aeronautical engineers out there regarding VGs and if they would have any affect or be of any aid should they be applied to the plane’s rudder and if they were applied, would they be placed along the leading edge or someplace else? I’m just curious to find out if they might… Continue

Added by Jay Parker on February 3, 2010 at 7:17am — 6 Comments

Nothing goes as Planned

The plan was to finish before the weather got bad here in British Columbia, test fly the aircraft then paint it this winter. Well one thing after another and here we are end of Jan., still no test fly due to weather. So C-IIOA got sent off to the paint booth yesterday. In about two weeks we see what the weather holds for us and C-IIOA will have a new look.

Added by Debra and Patrick Nesbitt on February 1, 2010 at 4:39pm — 1 Comment

Wing Upgrade - doubler and nose rib template

Now that I'm past the solid rivets it's onto the wing doubler. This seemed fairly easy, except that back drilling the doubler was going to be a challenge, so I removed the 2 rear ribs. I've seen pictures of others doing this.

-

backside wing doubler

-

finished doubler

-

Next step was to reinstall the nose ribs. First I replaced the top… Continue

Added by Jake Reyna on January 31, 2010 at 4:10pm — 2 Comments

Flying the Upgraded Zodiac

We've had lousy flying weather in Mexico, Missouri lately (which is really not that typical), so when the sky looked OK this morning Roger and I pulled out the upgraded Zodiac XL for a pleasure flight...

Here's the video:



I hope you enjoy it as much as we… Continue

Added by Sebastien Heintz on January 27, 2010 at 4:30pm — 14 Comments

I just took a big turn around in my desired engine for my CH-750, switching from Rotec R-2800 to the Jabiru 3300.

Today I took another look at the Jabiru 3300, 120 hp engine and really liked what I saw. I was comparing it to the stylish radial engine, the Rotec R-2800. I like the fact that it is only $17,500 new and sold in a town not far from where I live now here in Tennessee. It includes all the accessories including mounting for that price. They also sell the front cowling/nose bowls for the engine (they show an engine mounting process for a on a 701 or 750 on their website:… Continue

Added by Jay Parker on January 27, 2010 at 1:02pm — 11 Comments

Solid Rivet removal - Navy Method

Started on the wings today, 26Jan10, and struggled for hours to remove any solid rivets and I have the tools. So I searched the Internet and found "Removing Solid Rivets" by Gil Alexander – EAA Technical Counselor.



It works really well on the big solid rivets. I drilled with a #20, but not as deep as he recommended and used the Riveting Hammer to punch out the rivet. I have a cinder… Continue

Added by Jake Reyna on January 27, 2010 at 7:39am — 5 Comments

Completing the fuselage Upgrade.

In this blog: Side Doublers, Seat Angles, Rear Attachment Uprights, "Z" angle, 2x4 assistant, Bucking Station revision, "T" and ..... links to other blogs at the bottom of this page.

-

I needed to block up the fuselage after removing the rivets and bolts. The right side was off just a bit, I had problems on the left. Must have been an original manufacturing issue ...

-

-…

Continue

Added by Jake Reyna on January 26, 2010 at 10:30am — 1 Comment

Sebring U.S. Sport Aviation Expo 2010

Following is a recap of the Sebring LSA Aviation Expo from last week in Sebring, Florida.

The bright yellow STOL CH 750LS and the "upgraded" Zodiac CH 650LS at the Sebring Expo:

On the two days prior to the show,… Continue

Added by Sebastien Heintz on January 25, 2010 at 5:51pm — 3 Comments

Needs BRS for my CH-701

Looking for a BRS for my freshly rebuilt CH-701
Regards
Ranbir

Added by Ranbir Singh on January 22, 2010 at 5:30am — 2 Comments

BBQ at Sun-N-Fun

I am planning to come to the Picknick at Lakeland. I will be bringing a friend again this year.
Bill Campbell

Added by William Campbell on January 21, 2010 at 2:22pm — No Comments

Featured Blog Posts

View All

Latest Blog Posts

Most Popular Blog Posts

Monthly Archives

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

1999

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.